API 指南

基础概念

组件

每个 Percipio 深度相机包含多个器件，如包括左红外图像传感器、右红外图像传感器、激光投射器、彩色图像传感器、IMU 等器件，我们把这些器件统称为组件（Component）。

组件也可能是虚拟器件，例如深度图像传感器、直方图设备等，尽管并不存在这些实体器件，从数据访问的角度并没有什么区别，用户可以同操作真实存在的器件一样操作这些虚拟器件，完成相应的功能设置。

Percipio 深度相机作为一个设备，拥有工作模式相关配置、连接状态保持、网络配置与数据重传配置、光学外参等属性，为实现对这些属性的访问，我们把相机做为一个抽象组件，即设备 (Device) 组件。

相机包含的全体组件定义如下：

typedef enum TY_DEVICE_COMPONENT_LIST
{
    TY_COMPONENT_DEVICE         = 0x80000000, ///< Abstract component stands for whole device, always enabled
    TY_COMPONENT_DEPTH_CAM      = 0x00010000, ///< Depth camera
    TY_COMPONENT_IR_CAM_LEFT    = 0x00040000, ///< Left IR camera
    TY_COMPONENT_IR_CAM_RIGHT   = 0x00080000, ///< Right IR camera
    TY_COMPONENT_RGB_CAM_LEFT   = 0x00100000, ///< Left RGB camera
    TY_COMPONENT_RGB_CAM_RIGHT  = 0x00200000, ///< Right RGB camera
    TY_COMPONENT_LASER          = 0x00400000, ///< Laser
    TY_COMPONENT_IMU            = 0x00800000, ///< Inertial Measurement Unit
    TY_COMPONENT_BRIGHT_HISTO   = 0x01000000, ///< virtual component for brightness histogram of ir
    TY_COMPONENT_STORAGE        = 0x02000000, ///< virtual component for device storage

    TY_COMPONENT_RGB_CAM        = TY_COMPONENT_RGB_CAM_LEFT ///< Some device has only one RGB camera, map it to left
}TY_DEVICE_COMPONENT_LIST;

其中，

TY_COMPONENT_DEVICE 代表独立深度相机实体，以下简称 深度相机。通过该组件可以控制相机的工作模式、内部 Sensor 曝光同步模式、光学外参等属性。
TY_COMPONENT_DEPTH_CAM 代表深度图像传感器组件。
TY_COMPONENT_IR_CAM_LEFT 代表左红外图像传感器组件。
TY_COMPONENT_IR_CAM_RIGHT 代表右红外图像传感器组件。
TY_COMPONENT_RGB_CAM_LEFT 代表左彩色图像传感器组件。若深度相机仅有一个彩色图像传感器组件，TY_COMPONENT_RGB_CAM 默认代表 TY_COMPONENT_RGB_CAM_LEFT。
TY_COMPONENT_RGB_CAM_RIGHT 代表右彩色图像传感器组件。

属性

深度相机或者各个组件有多种不同的功能参数，SDK 软件工程中称之为属性 (feature)。依据各个属性的特点，SDK 分别为这些属性定义 int、bool、struct、enum 等类型的数据结构。用户可以通过 TYGetInt / TYSetInt / TYGetStruct / TYSetStruct 等类似风格的 API 函数，读取或者写入某个组件的某个属性。

不同组件的属性之间也可以存在联动关系。修改组件的一个属性时，深度相机会同步修改另一个组件的同一属性，这种关系称为绑定 (binding)。绑定关系可以通过查询属性信息得知。

不同型号、不同版本的深度相机支持不同的组件和属性。

Note

通过以下方式，可查询深度相机支持的组件和和属性：

通过 API 可查询深度相机支持的组件和属性。
通过 SDK 示例程序 DumpAllFeatures 可列出当前操作相机的所有组件和支持的属性信息。
通过 SDK 示例程序 DumpAllFeatures -d，可以生成 fetch_config.xml 文件，在该文件中可以查看深度相机支持的组件和和属性。

以 FM851-E1 为例，该相机包含的组件、支持的属性以及属性与组件的隶属关系，请参考下方 fetch_config.xml 文件内的配置描述：

<?xml version="1.0" ?>
<config version="1">
    <comprotocol>1.0</comprotocol>
    <component addr="0x01000000" id="0x80000000" name="device">
            <feature hide="0" id="0x5f00" name="SN" rw="1">207000129217</feature>
            <feature hide="0" id="0x5f01" name="vendor" rw="1">Percipio</feature>
            <feature hide="0" id="0x5f02" name="model" rw="1">FM851-E1</feature>
            <feature hide="0" id="0x5f08" name="user defined name" rw="1">Percipio</feature>
            <feature addr="0x204" hide="0" id="0x1202" name="frame per trigger" rw="3">1</feature>
            <feature addr="0x208" hide="0" id="0x7523" name="struct trigger mode" rw="3"/>
            <feature addr="0x218" hide="0" id="0x7525" name="struct trigger mode ex" rw="3"/>
            <feature absaddr="0x64c" hide="0" id="0x1010" name="persistent IP" rw="3"/>
            <feature absaddr="0x65c" hide="0" id="0x1011" name="persistent netmask" rw="3"/>
            <feature absaddr="0x66c" hide="0" id="0x1012" name="persistent gateway" rw="3"/>
            <feature addr="0x400020" hide="0" id="0x1014" inc="1" max="10000" min="0" name="packet delay" rw="3"/>
            <feature addr="0x40002c" hide="0" id="0x1017" inc="1" max="1500" min="100" name="packet size" rw="3"/>
            <feature addr="0x400024" hide="0" id="0x1016" name="ntp server ip" rw="3"/>
            <feature addr="0x214" hide="0" id="0x4207" name="trigger out io" rw="2" writableAtRun="1"/>
            <feature addr="0x20c" hide="0" id="0x4205" name="cmos sync" rw="3"/>
            <feature hide="0" id="0x4203" name="keep alive onoff" rw="3"/>
            <feature hide="0" id="0x1204" inc="1" max="30000" min="2000" name="keep alive timeout" rw="3"/>
            <feature addr="0x210" hide="0" id="0x1206" inc="1" max="1300000" min="0" name="trigger delay us" rw="3"/>
            <feature addr="0x21C" hide="0" id="0x1208" inc="1" max="1300000" min="1" name="trigger duration us" rw="3"/>
            <feature addr="0x220" hide="0" id="0x3209" name="stream async" rw="3">
                    <entry name="async off" value="0"/>
                    <entry name="async depth" value="1"/>
                    <entry name="async rgb" value="2"/>
                    <entry name="async depth rgb" value="3"/>
                    <entry name="async all" value="255"/>
            </feature>
            <feature addr="0x200" hide="0" id="0x3201" name="trig pol" rw="3">
                    <entry name="falling edge" value="0"/>
                    <entry name="rising edge" value="1"/>
            </feature>
            <feature addr="0x228" hide="0" id="0x1210" name="capture time us" rw="1" volatile="1"/>
            <feature addr="0x22c" hide="0" id="0x3211" name="sync type" rw="3" volatile="1">
                    <entry name="sync type none" value="0"/>
                    <entry name="sync type host" value="1"/>
                    <entry name="sync type ntp" value="2"/>
                    <entry name="sync type ptp slave" value="3"/>
                    <entry name="sync type can" value="4"/>
                    <entry name="sync type ptp master" value="5"/>
            </feature>
            <feature addr="0x230" hide="0" id="0x4212" name="sync ready" rw="1" volatile="1"/>
            <feature addr="0x234" hide="0" id="0x7526" name="trigger timer list" rw="3" volatile="1" writableAtRun="1"/>
            <feature addr="0x238" hide="0" id="0x7527" name="trigger timer period" rw="3" volatile="1" writableAtRun="1"/>
            <feature id="0x5f03" name="hardware version" rw="1" hide="0">1.3.0</feature>
            <feature id="0x5f04" name="firmware version" rw="1" hide="0">3.13.16</feature>
            <build>
                    <hash>model:AP03B04AM81X_X_X7_F121_DVP;rtl:R1.1.13_0_gcf0ff384e3;kernel:R3.13.16-0-g98f7c91b8d;tycam:R3.5.18-6b7b483c;gevcam:R3.13.16-0-g9ac78d34</hash>
            </build>
            <config_version>pre_release</config_version>
            <tech_model>AM830-GTIS8-47-CBO</tech_model>
            <generated_time>2021-10-09T135051</generated_time>
            <calibration_time>2021-09-18T033241</calibration_time>
    </component>
    <component addr="0x02000000" id="0x00010000" name="depth">
            <feature hide="0" id="0x210a" name="scale unit" rw="1">1.0</feature>
            <feature hide="1" id="0x1003" name="intrinsic width" rw="1">1280</feature>
            <feature hide="1" id="0x1004" name="intrinsic height" rw="1">960</feature>
            <feature hide="0" id="0x7000" name="depth intrinsic" rw="1"> 1057.0913560361116 0.0 628.5735321044922 0.0 1057.0913560361116 490.0430450439453 0.0 0.0 1.0</feature>
            <feature addr="0x10" hide="0" id="0x1104" name="image width" rw="1"/>
            <feature addr="0x14" hide="0" id="0x1105" name="image height" rw="1"/>
            <feature addr="0x18" hide="0" id="0x3109" name="image mode" rw="3">
                    <entry name="DEPTH16_640x480" value="0x202801e0"/>
                    <entry name="DEPTH16_1280x960" value="0x205003c0"/>
                    <entry name="DEPTH16_320x240" value="0x201400f0"/>
            </feature>
    </component>
    <component addr="0x03000000" id="0x00040000" name="leftir">
            <feature addr="0x18" hide="0" id="0x3109" name="image mode" rw="1">
                    <entry name="mono8 1280x960" value="0x105003c0"/>
            </feature>
            <feature addr="0x10" hide="0" id="0x1104" name="image width" rw="1">1280</feature>
            <feature addr="0x14" hide="0" id="0x1105" name="image height" rw="1">960</feature>
            <feature hide="1" id="0x1003" name="intrinsic width" rw="1">1280</feature>
            <feature hide="1" id="0x1004" name="intrinsic height" rw="1">960</feature>
            <feature hide="0" id="0x7000" name="intrinsic" rw="1"> 1101.9569754361974 0.0 632.6048087423237 0.0 1102.146112084317 476.4526537628572 0.0 0.0 1.0</feature>
            <feature hide="0" id="0x7006" name="distortion" rw="1"> -0.4205079032648662 -0.24291850706937249 0.0032100257861444777 0.001990176887732496 0.10267820146085133 -0.1716891282414848 -0.44131454807106735 0.11949232513267484 -0.003917085741072632 0.0008741779334892755 -0.0070731359600290965 0.001578093155976139</feature>
            <feature addr="0x324" hide="0" id="0x4510" name="undistort" rw="3"/>
            <feature addr="0x304" hide="0" id="0x1301" inc="1" max="1088" min="3" name="exposure time" rw="3" writableAtRun="1"/>
            <feature addr="0x310" hide="0" id="0x1303" inc="1" max="255" min="0" name="gain" rw="3" writableAtRun="1"/>
            <feature addr="0x328" hide="0" id="0x1524" inc="1" max="3" min="0" name="analog gain" rw="3" writableAtRun="1"/>
    </component>
    <component addr="0x04000000" id="0x00080000" name="rightir">
            <feature addr="0x18" hide="0" id="0x3109" name="image mode" rw="1">
                    <entry name="mono8 1280x960" value="0x105003c0"/>
            </feature>
            <feature addr="0x10" hide="0" id="0x1104" name="image width" rw="1">1280</feature>
            <feature addr="0x14" hide="0" id="0x1105" name="image height" rw="1">960</feature>
            <feature hide="1" id="0x1003" name="intrinsic width" rw="1">1280</feature>
            <feature hide="1" id="0x1004" name="intrinsic height" rw="1">960</feature>
            <feature hide="0" id="0x7000" name="intrinsic" rw="1"> 1103.249499342999 0.0 630.7622752161499 0.0 1103.2889923805135 509.1805648068269 0.0 0.0 1.0</feature>
            <feature hide="0" id="0x7006" name="distortion" rw="1"> 0.1607226089625935 0.04310528484860882 0.004990395649432428 0.0008160696949675246 0.4613061089900877 0.4151237879065313 -0.030265818405065734 0.5510116415135468 -0.0011233127606329815 0.00022496932265199835 -0.010514656609723044 0.0024125513606033243</feature>
            <feature hide="0" id="0x7001" name="rightIR to leftIR extrinsic" rw="1"> 0.9999855582465992 -0.0024780726921431236 0.004768904902616075 -78.91377474894921 0.002521488192062276 0.9999552374414395 -0.009119496188449452 0.24564214899255385 -0.0047460926597604315 0.009131389224335365 0.9999470447655208 -0.12529605489830792 0 0 0 1</feature>
            <feature bind="0x00044510"/>
            <feature addr="0x304" hide="0" id="0x1301" inc="1" max="1088" min="3" name="exposure time" rw="3" writableAtRun="1"/>
            <feature addr="0x310" hide="0" id="0x1303" inc="1" max="255" min="0" name="gain" rw="3" writableAtRun="1"/>
            <feature addr="0x328" hide="0" id="0x1524" inc="1" max="3" min="0" name="analog gain" rw="3" writableAtRun="1"/>
    </component>
    <component addr="0x05000000" id="0x00100000" name="rgb">
            <feature addr="0x10" hide="0" id="0x1104" name="image width" rw="1" volatile="1"/>
            <feature addr="0x14" hide="0" id="0x1105" name="image height" rw="1" volatile="1"/>
            <feature addr="0x18" hide="0" id="0x3109" name="image mode" rw="3">
                    <entry name="yuyv 1280x960" value="0x225003c0"/>
                    <entry name="yuyv 640x480" value="0x222801e0"/>
                    <entry name="yuyv 320x240" value="0x221400f0"/>
            </feature>
            <feature addr="0x224" hide="0" id="0x7305" name="struct aec roi" rw="3" writableAtRun="1"/>
            <feature addr="0x300" hide="0" id="0x4300" name="auto exp ctrl" rw="3" writableAtRun="1"/>
            <feature addr="0x304" hide="0" id="0x1301" inc="1" max="1088" min="3" name="exposure time" rw="3" writableAtRun="1"/>
            <feature addr="0x314" hide="0" id="0x4304" name="auto white balance" rw="3" writableAtRun="1"/>
            <feature addr="0x318" hide="0" id="0x1520" inc="1" max="4095" min="1" name="r gain" rw="3" writableAtRun="1"/>
            <feature addr="0x31c" hide="0" id="0x1521" inc="1" max="4095" min="1" name="g gain" rw="3" writableAtRun="1"/>
            <feature addr="0x320" hide="0" id="0x1522" inc="1" max="4095" min="1" name="b gain" rw="3" writableAtRun="1"/>
            <feature addr="0x328" hide="0" id="0x1524" inc="1" max="63" min="1" name="analog gain" rw="3" writableAtRun="1"/>
            <feature addr="0x30c" hide="0" id="0x4302" name="auto gain ctrl" rw="3" writableAtRun="1"/>
            <feature hide="1" id="0x1003" name="intrinsic width" rw="1">1280</feature>
            <feature hide="1" id="0x1004" name="intrinsic height" rw="1">960</feature>
            <feature hide="0" id="0x7000" name="rgb intrinsic" rw="1"> 1091.57297791 0.0 639.331289979 0.0 1091.44752035 503.323233757 0.0 0.0 1.0</feature>
            <feature hide="0" id="0x7001" name="rgb to leftIR extrinsic" rw="1"> 0.999986864606 -0.00117676964364 0.00498856976817 24.0101958417 0.00117657829273 0.999999306979 4.12924369618e-05 -0.20405264306 -0.00498861490267 -3.54224516683e-05 0.999987556156 -0.534259434997 0.0 0.0 0.0 1.0</feature>
            <feature hide="0" id="0x7006" name="distortion" rw="1">0.168248655694 0.0613630693992 0.00541864468694 0.0015374141221 0.514789735342 0.414091440597 0.000124699681652 0.590942851883 -0.00271625606685 0.000477951236185 -0.010361247278 0.00262128322074</feature>
    </component>
    <component addr="0x07000000" id="0x00400000" name="laser">
            <feature addr="0x500" hide="0" id="0x1500" inc="1" max="100" min="0" name="power" rw="3" writableAtRun="1"/>
            <feature addr="0x504" hide="0" id="0x4501" name="auto ctrl" rw="3"/>
    </component>
    <component addr="0x08000000" id="0x01000000" name="histogram">    </component>
    <component addr="0x09000000" id="0x02000000" name="storage">
            <feature addr="0x100000" hide="0" id="0x600a" name="custom block" rw="3" size="4096" volatile="1"/>
            <feature addr="0x200000" hide="0" id="0x600b" name="isp block" rw="3" size="65536" volatile="1"/>
    </component>
</config>

根据上述的 fetch_config.xml 文件，可获得该相机包括的组件及各个组件支持的部分属性：

组件	部分属性
device	SN、model、packet delay、packet size、trigger out io、cmos sync、keep alive onoff、stream async、trig pol、capture time us、sync type
depth	image width、image height、image mode
leftir / rightir	image mode、image width、image height、undistort、exposure time、gain、analog gain
rgb	image width、image height、image mode、exposure time、auto white balance、r gain、g gain、b gain、analog gain、auto gain ctrl
laser	power、 auto ctrl
histogram	无属性，该组件专门提供 histogram 数据。
storage	custom block、isp block

Note

<component></component>一对组件标签内介绍了该组件支持的属性。
<feature></feature>一对属性标签内介绍了该属性的名称、最大值、最小值、读写权限、设置方式，部分属性枚举了可设置值。
- 读写权限：rw=1 表示只读，rw=3 表示可读写。
- 设置方式：writableAtRun=1 表示该属性可在相机采图过程中设置，没有此说明的属性则需在相机开始采图前设置。

不同的属性的数据值分为整型（INT）、布尔型（BOOL）、浮点型（FLOAT）、枚举型（ENUM）和结构体型（STRUCT），具体内容请参考属性定义：

typedef enum TY_FEATURE_ID_LIST
{
    TY_STRUCT_CAM_INTRINSIC         = 0x0000 | TY_FEATURE_STRUCT, ///< see TY_CAMERA_INTRINSIC
    TY_STRUCT_EXTRINSIC_TO_DEPTH    = 0x0001 | TY_FEATURE_STRUCT, ///< extrinsic between  depth cam and current component , see TY_CAMERA_EXTRINSIC
    TY_STRUCT_EXTRINSIC_TO_IR_LEFT  = 0x0002 | TY_FEATURE_STRUCT, ///< extrinsic between  left IR and current compoent, see TY_CAMERA_EXTRINSIC
    TY_STRUCT_CAM_DISTORTION        = 0x0006 | TY_FEATURE_STRUCT, ///< see TY_CAMERA_DISTORTION
    TY_STRUCT_CAM_CALIB_DATA        = 0x0007 | TY_FEATURE_STRUCT, ///< see TY_CAMERA_CALIB_INFO
    TY_BYTEARRAY_CUSTOM_BLOCK       = 0x000A | TY_FEATURE_BYTEARRAY, ///< used for reading/writing custom block
    TY_BYTEARRAY_ISP_BLOCK          = 0x000B | TY_FEATURE_BYTEARRAY, ///< used for reading/writing fpn block

    TY_INT_PERSISTENT_IP            = 0x0010 | TY_FEATURE_INT,
    TY_INT_PERSISTENT_SUBMASK       = 0x0011 | TY_FEATURE_INT,
    TY_INT_PERSISTENT_GATEWAY       = 0x0012 | TY_FEATURE_INT,
    TY_BOOL_GVSP_RESEND             = 0x0013 | TY_FEATURE_BOOL,
    TY_INT_PACKET_DELAY             = 0x0014 | TY_FEATURE_INT,    ///< microseconds
    TY_INT_ACCEPTABLE_PERCENT       = 0x0015 | TY_FEATURE_INT,
    TY_INT_NTP_SERVER_IP            = 0x0016 | TY_FEATURE_INT,    ///< Ntp server IP
    TY_INT_PACKET_SIZE              = 0x0017 | TY_FEATURE_INT,
    TY_STRUCT_CAM_STATISTICS        = 0x00ff | TY_FEATURE_STRUCT, ///< statistical information, see TY_CAMERA_STATISTICS

    TY_INT_WIDTH_MAX                = 0x0100 | TY_FEATURE_INT,
    TY_INT_HEIGHT_MAX               = 0x0101 | TY_FEATURE_INT,
    TY_INT_OFFSET_X                 = 0x0102 | TY_FEATURE_INT,
    TY_INT_OFFSET_Y                 = 0x0103 | TY_FEATURE_INT,
    TY_INT_WIDTH                    = 0x0104 | TY_FEATURE_INT,  ///< Image width
    TY_INT_HEIGHT                   = 0x0105 | TY_FEATURE_INT,  ///< Image height
    TY_ENUM_IMAGE_MODE              = 0x0109 | TY_FEATURE_ENUM, ///< Resolution-PixelFromat mode, see TY_IMAGE_MODE_LIST

    //@brief scale unit
    //depth map is uint16 pixel format with default millimeter unit ,for some device  can output Sub-millimeter accuracy data
    //the acutal depth (mm)= PixelValue * ScaleUnit
    TY_FLOAT_SCALE_UNIT             = 0x010a | TY_FEATURE_FLOAT,

    TY_ENUM_TRIGGER_POL             = 0x0201 | TY_FEATURE_ENUM,  ///< Trigger POL, see TY_TRIGGER_POL_LIST
    TY_INT_FRAME_PER_TRIGGER        = 0x0202 | TY_FEATURE_INT,  ///< Number of frames captured per trigger
    TY_STRUCT_TRIGGER_PARAM         = 0x0523 | TY_FEATURE_STRUCT,  ///< param of trigger, see TY_TRIGGER_PARAM
    TY_STRUCT_TRIGGER_PARAM_EX      = 0x0525 | TY_FEATURE_STRUCT,  ///< param of trigger, see TY_TRIGGER_PARAM_EX
    TY_STRUCT_TRIGGER_TIMER_LIST    = 0x0526 | TY_FEATURE_STRUCT,  ///< param of trigger mode 20, see TY_TRIGGER_TIMER_LIST
    TY_STRUCT_TRIGGER_TIMER_PERIOD  = 0x0527 | TY_FEATURE_STRUCT,  ///< param of trigger mode 21, see TY_TRIGGER_TIMER_PERIOD
    TY_BOOL_KEEP_ALIVE_ONOFF        = 0x0203 | TY_FEATURE_BOOL, ///< Keep Alive switch
    TY_INT_KEEP_ALIVE_TIMEOUT       = 0x0204 | TY_FEATURE_INT,  ///< Keep Alive timeout
    TY_BOOL_CMOS_SYNC               = 0x0205 | TY_FEATURE_BOOL, ///< Cmos sync switch
    TY_INT_TRIGGER_DELAY_US         = 0x0206 | TY_FEATURE_INT,  ///< Trigger delay time, in microseconds
    TY_BOOL_TRIGGER_OUT_IO          = 0x0207 | TY_FEATURE_BOOL, ///< Trigger out IO
    TY_INT_TRIGGER_DURATION_US      = 0x0208 | TY_FEATURE_INT,  ///< Trigger duration time, in microseconds
    TY_ENUM_STREAM_ASYNC            = 0x0209 | TY_FEATURE_ENUM,  ///< stream async switch, see TY_STREAM_ASYNC_MODE
    TY_INT_CAPTURE_TIME_US          = 0x0210 | TY_FEATURE_INT,  ///< capture time in multi-ir
    TY_ENUM_TIME_SYNC_TYPE          = 0x0211 | TY_FEATURE_ENUM, ///< see TY_TIME_SYNC_TYPE
    TY_BOOL_TIME_SYNC_READY         = 0x0212 | TY_FEATURE_BOOL,
    TY_BOOL_FLASHLIGHT              = 0x0213 | TY_FEATURE_BOOL,
    TY_INT_FLASHLIGHT_INTENSITY     = 0x0214 | TY_FEATURE_INT,

    TY_BOOL_AUTO_EXPOSURE           = 0x0300 | TY_FEATURE_BOOL, ///< Auto exposure switch
    TY_INT_EXPOSURE_TIME            = 0x0301 | TY_FEATURE_INT,  ///< Exposure time in percentage
    TY_BOOL_AUTO_GAIN               = 0x0302 | TY_FEATURE_BOOL, ///< Auto gain switch
    TY_INT_GAIN                     = 0x0303 | TY_FEATURE_INT,  ///< Sensor Gain
    TY_BOOL_AUTO_AWB                = 0x0304 | TY_FEATURE_BOOL, ///< Auto white balance
    TY_STRUCT_AEC_ROI               = 0x0305 | TY_FEATURE_STRUCT,  ///< region of aec statistics, see TY_AEC_ROI_PARAM

    TY_INT_LASER_POWER              = 0x0500 | TY_FEATURE_INT,  ///< Laser power level
    TY_BOOL_LASER_AUTO_CTRL         = 0x0501 | TY_FEATURE_BOOL, ///< Laser auto ctrl

    TY_BOOL_UNDISTORTION            = 0x0510 | TY_FEATURE_BOOL, ///< Output undistorted image
    TY_BOOL_BRIGHTNESS_HISTOGRAM    = 0x0511 | TY_FEATURE_BOOL, ///< Output bright histogram
    TY_BOOL_DEPTH_POSTPROC          = 0x0512 | TY_FEATURE_BOOL, ///< Do depth map postproc

    TY_INT_R_GAIN                   = 0x0520 | TY_FEATURE_INT,  ///< Gain of R channel
    TY_INT_G_GAIN                   = 0x0521 | TY_FEATURE_INT,  ///< Gain of G channel
    TY_INT_B_GAIN                   = 0x0522 | TY_FEATURE_INT,  ///< Gain of B channel

    TY_INT_ANALOG_GAIN              = 0x0524 | TY_FEATURE_INT,  ///< Analog gain
    TY_BOOL_HDR                     = 0x0525 | TY_FEATURE_BOOL,
    TY_BYTEARRAY_HDR_PARAMETER      = 0x0526 | TY_FEATURE_BYTEARRAY,

    TY_BOOL_IMU_DATA_ONOFF          = 0x0600 | TY_FEATURE_BOOL, ///< IMU Data Onoff
    TY_STRUCT_IMU_ACC_BIAS          = 0x0601 | TY_FEATURE_STRUCT, ///< IMU acc bias matrix, see TY_ACC_BIAS
    TY_STRUCT_IMU_ACC_MISALIGNMENT  = 0x0602 | TY_FEATURE_STRUCT, ///< IMU acc misalignment matrix, see TY_ACC_MISALIGNMENT
    TY_STRUCT_IMU_ACC_SCALE         = 0x0603 | TY_FEATURE_STRUCT, ///< IMU acc scale matrix, see TY_ACC_SCALE
    TY_STRUCT_IMU_GYRO_BIAS         = 0x0604 | TY_FEATURE_STRUCT, ///< IMU gyro bias matrix, see TY_GYRO_BIAS
    TY_STRUCT_IMU_GYRO_MISALIGNMENT = 0x0605 | TY_FEATURE_STRUCT, ///< IMU gyro misalignment matrix, see TY_GYRO_MISALIGNMENT
    TY_STRUCT_IMU_GYRO_SCALE        = 0x0606 | TY_FEATURE_STRUCT, ///< IMU gyro scale matrix, see TY_GYRO_SCALE
    TY_STRUCT_IMU_CAM_TO_IMU        = 0x0607 | TY_FEATURE_STRUCT, ///< IMU camera to imu matrix, see TY_CAMERA_TO_IMU
    TY_ENUM_IMU_FPS                 = 0x0608 | TY_FEATURE_ENUM, ///< IMU fps, see TY_IMU_FPS_LIST

    TY_ENUM_DEPTH_QUALITY           = 0x0900 | TY_FEATURE_ENUM,  ///< the quality of generated depth, see TY_DEPTH_QUALITY
    TY_INT_FILTER_THRESHOLD         = 0x0901 | TY_FEATURE_INT,   ///< the threshold of the noise filter, 0 for disabled
    TY_INT_TOF_CHANNEL              = 0x0902 | TY_FEATURE_INT,   ///< the frequency channel of tof
}TY_FEATURE_ID_LIST;

属性的数据结构示例：

depth、leftir / rightir、rgb 组件支持的分辨率如下：

typedef enum TY_RESOLUTION_MODE_LIST
{
    TY_RESOLUTION_MODE_160x100      = (160<<12)+100,    ///< 0x000a0078
    TY_RESOLUTION_MODE_160x120      = (160<<12)+120,    ///< 0x000a0078
    TY_RESOLUTION_MODE_240x320      = (240<<12)+320,    ///< 0x000f0140
    TY_RESOLUTION_MODE_320x180      = (320<<12)+180,    ///< 0x001400b4
    TY_RESOLUTION_MODE_320x200      = (320<<12)+200,    ///< 0x001400c8
    TY_RESOLUTION_MODE_320x240      = (320<<12)+240,    ///< 0x001400f0
    TY_RESOLUTION_MODE_480x640      = (480<<12)+640,    ///< 0x001e0280
    TY_RESOLUTION_MODE_640x360      = (640<<12)+360,    ///< 0x00280168
    TY_RESOLUTION_MODE_640x400      = (640<<12)+400,    ///< 0x00280190
    TY_RESOLUTION_MODE_640x480      = (640<<12)+480,    ///< 0x002801e0
    TY_RESOLUTION_MODE_960x1280     = (960<<12)+1280,    ///< 0x003c0500
    TY_RESOLUTION_MODE_1280x720     = (1280<<12)+720,   ///< 0x005002d0
    TY_RESOLUTION_MODE_1280x800     = (1280<<12)+800,   ///< 0x00500320
    TY_RESOLUTION_MODE_1280x960     = (1280<<12)+960,   ///< 0x005003c0
    TY_RESOLUTION_MODE_1920x1080    = (1920<<12)+1080,   ///< 0x00780438
    TY_RESOLUTION_MODE_2592x1944    = (2592<<12)+1944,  ///< 0x00a20798
}TY_RESOLUTION_MODE_LIST;

depth、leftir / rightir、rgb 组件支持的图像格式如下：

typedef enum TY_PIXEL_FORMAT_LIST{
    TY_PIXEL_FORMAT_UNDEFINED   = 0,
    TY_PIXEL_FORMAT_MONO        = (TY_PIXEL_8BIT  | (0x0 << 24)), ///< 0x10000000
    TY_PIXEL_FORMAT_BAYER8GB    = (TY_PIXEL_8BIT  | (0x1 << 24)), ///< 0x11000000
    TY_PIXEL_FORMAT_BAYER8BG    = (TY_PIXEL_8BIT  | (0x2 << 24)), ///< 0x12000000
    TY_PIXEL_FORMAT_BAYER8GR    = (TY_PIXEL_8BIT  | (0x3 << 24)), ///< 0x13000000
    TY_PIXEL_FORMAT_BAYER8RG    = (TY_PIXEL_8BIT  | (0x4 << 24)), ///< 0x14000000
    TY_PIXEL_FORMAT_DEPTH16     = (TY_PIXEL_16BIT | (0x0 << 24)), ///< 0x20000000
    TY_PIXEL_FORMAT_YVYU        = (TY_PIXEL_16BIT | (0x1 << 24)), ///< 0x21000000, yvyu422
    TY_PIXEL_FORMAT_YUYV        = (TY_PIXEL_16BIT | (0x2 << 24)), ///< 0x22000000, yuyv422
    TY_PIXEL_FORMAT_MONO16      = (TY_PIXEL_16BIT | (0x3 << 24)), ///< 0x23000000,
    TY_PIXEL_FORMAT_RGB         = (TY_PIXEL_24BIT | (0x0 << 24)), ///< 0x30000000
    TY_PIXEL_FORMAT_BGR         = (TY_PIXEL_24BIT | (0x1 << 24)), ///< 0x31000000
    TY_PIXEL_FORMAT_JPEG        = (TY_PIXEL_24BIT | (0x2 << 24)), ///< 0x32000000
    TY_PIXEL_FORMAT_MJPG        = (TY_PIXEL_24BIT | (0x3 << 24)), ///< 0x33000000
}TY_PIXEL_FORMAT_LIST;

Note

使用 TYSetEnum() 接口函数，通过设置图像传感器的 TY_ENUM_IMAGE_MODE 为 TY_IMAGE_MODE_格式_分辨率，即可同时设置图像的输出格式和分辨率。
SDK 示例程序 DumpAllFeatures 可列出当前相机组件所支持的全部图像格式和分辨率。

常用光学参数数据结构如下，可使用 TYGetStruct() 接口函数读取：

typedef struct TY_VECT_3F
{
    float   x;
    float   y;
    float   z;
}TY_VECT_3F;

///  a 3x3 matrix
/// |.|.|.|
/// | --|---|---|
/// | fx|  0| cx|
/// |  0| fy| cy|
/// |  0|  0|  1|
typedef struct TY_CAMERA_INTRINSIC
{
    float data[3*3];
}TY_CAMERA_INTRINSIC;

/// a 4x4 matrix
///  |.|.|.|.|
///  |---|----|----|---|
///  |r11| r12| r13| t1|
///  |r21| r22| r23| t2|
///  |r31| r32| r33| t3|
///  | 0 |   0|   0|  1|
typedef struct TY_CAMERA_EXTRINSIC
{
    float data[4*4];
}TY_CAMERA_EXTRINSIC;

///camera distortion parameters
typedef struct TY_CAMERA_DISTORTION
{
    float data[12];///<Definition is compatible with opencv3.0+ :k1,k2,p1,p2,k3,k4,k5,k6,s1,s2,s3,s4
}TY_CAMERA_DISTORTION;


///camera 's cailbration data
///@see TYGetStruct
typedef struct TY_CAMERA_CALIB_INFO
{
  int32_t intrinsicWidth;
  int32_t intrinsicHeight;
  TY_CAMERA_INTRINSIC   intrinsic;  // TY_STRUCT_CAM_INTRINSIC
  TY_CAMERA_EXTRINSIC   extrinsic;  // TY_STRUCT_EXTRINSIC_TO_LEFT_IR
  TY_CAMERA_DISTORTION  distortion; // TY_STRUCT_CAM_DISTORTION
}TY_CAMERA_CALIB_INFO;

图像获取流程

深度相机的配置和图像获取流程如下图所示：

下面以 SDK 示例程序 Simpleview_FetchFrame 为例详细说明图像获取流程。

初始化API

TYInitLib 初始化设备对象等数据结构。

打开设备

获取设备列表

初次获取设备信息时可以通过 selectDevice() 查询已连接的设备数量，并获得所有已连接的设备列表。

打开接口

TYOpenInterface 打开接口。

打开设备

TYOpenDevice 打开设备。
TYOpenDeviceWithIP 打开网络设备。

配置组件

查询设备的组件状态

TYGetComponentIDs 获取设备支持的组件信息。
TYGetEnabledComponents 获取已经打开的组件信息。

配置组件

TYEnableComponents 使能组件。
TYDisableComponents 关闭组件。
设备打开后，默认只有虚拟组件 TY_COMPONENT_DEVICE 是使能状态。多个组件可以通过 位或 方式同时使能。

int32_t componentIDs = TY_COMPONENT_DEPTH_CAM | TY_COMPONENT_RGB_CAM;
TYEnableComponents(hDevice, componentIDs);

配置属性
- 查询指定属性的信息：
  
  TYGetFeatureInfo() 通过填充结构体 TY_FEATURE_INFO 来获取指定组件的指定属性的信息。如果指定组件不包含所指定的属性，则 TY_FEATURE_INFO 中 isValid 值为 false；如果该组件包含所指定的参数，则 TY_FEATURE_INFO 中 isValid 值为 true。也可以通过 TYGetIntRange 等具体参数类型的 API 接口查询指定功能参数的信息。
- 常用读写属性函数如下：
```
TYGetIntRange
TYGetInt
TYSetInt
TYGetFloatRange
TYGetFloat
TYSetFloat
TYGetEnumEntryCount
TYGetEnumEntryInfo
TYGetEnum
TYSetEnum
TYGetBool
TYSetBool
TYGetStringLength
TYGetString
TYSetString
TYGetStruct
TYSetStruct
```
  示例
  
  调用 TYSetEnum() 设置深度图像传感器输出数据的格式和分辨率：
```
LOGD("=== Configure feature, set resolution to 640x480.");
ASSERT_OK(TYSetEnum(hDevice, TY_COMPONENT_DEPTH_CAM, TY_ENUM_IMAGE_MODE, TY_IMAGE_MODE_DEPTH16_640x480));
```

帧缓冲管理

调用 API 查询当前配置下每个帧缓冲的大小。

uint32_t frameSize;
ASSERT_OK( TYGetFrameBufferSize(hDevice, &frameSize) );
LOGD("     - Get size of framebuffer, %d", frameSize);

分配深度数据存储空间。

按照实际查询函数返回的帧缓冲的大小分配两组 frameBuffer 空间，并传递给底层驱动缓冲队列，作为数据获取的通道。

驱动内部维护一个缓冲队列（frameBuffer Queue），每帧数据传出时会将填充好的 frameBuffer 作 Dequeue 操作，并完全传出给用户使用。用户完成该帧图像数据处理后，需做 Enqueue 动作以返还该 frameBuffer 给驱动层缓冲队列。用户需要保证新的一帧数据到来时驱动的缓冲队列不为空，否则该帧数据将被丢弃。
```
LOGD("     - Allocate & enqueue buffers");
char* frameBuffer[2];
frameBuffer[0] = new char[frameSize];
frameBuffer[1] = new char[frameSize];
LOGD("     - Enqueue buffer (%p, %d)", frameBuffer[0], frameSize);
ASSERT_OK( TYEnqueueBuffer(hDevice, frameBuffer[0], frameSize) );
LOGD("     - Enqueue buffer (%p, %d)", frameBuffer[1], frameSize);
ASSERT_OK( TYEnqueueBuffer(hDevice, frameBuffer[1], frameSize) );
```

回调函数注册

TYRegisterEventCallback

使用回调函数的方式获取图像数据时，需要注册该函数，当图像数据到达后，该回调函数会主动被执行。在使用主动获取图像模式时，需要调用该函数注册回调函数为 NULL。

LOGD("Register event callback");
ASSERT_OK(TYRegisterEventCallback(hDevice, eventCallback, NULL))

配置工作模式

根据实际需要配置深度相机工作模式，详情请参考工作模式配置。

启动深度采集

TYStartCapture

如果深度相机工作在模式 1 下，可以使用软件触发接口函数 TYSendSoftTrigger()，通过 USB 接口或者以太网接口发送指令，控制相机图像采集的时机。

获取帧数据

TYFetchFrame

主动获取深度数据模式下，应用可调用该接口获取深度数据。注意回调函数模式下不需要调用。获取数据后，用户程序进行运算处理时，应采用独立线程，避免堵塞图像获取线程的运转。

停止采集

TYStopCapture 停止图像数据采集，相机停止深度数据计算和输出。

关闭设备

TYCloseDevice 关闭设备，TYCloseInterface 释放占用的接口。

释放API

TYDeinitLib 释放 API 后，需要释放分配的内存资源，避免内存泄露。

API 详解

库加载与卸载

调用 Camport SDK 控制相机获取图像前，首先应完成 Camport SDK 库的加载动作，退出应用前应完成库文件的卸载操作。

inline TY_STATUS    TYInitLib                 (void);
TY_CAPI             TYDeinitLib               (void);

获取 Camport SDK 的版本信息。

TY_CAPI             TYLibVersion              (TY_VERSION_INFO* version);

接口控制

Camport SDK 同时支持 USB 深度相机和网络深度相机。发现设备前需要更新主机的 USB 接口、以太网接口、无线网络接口状态，获取接口句柄，退出应用程序前应释放接口句柄。

更新接口状态。

TY_CAPI             TYUpdateInterfaceList     ();

获取接口数量。

TY_CAPI             TYGetInterfaceNumber      (uint32_t* pNumIfaces);

获取接口列表。

TY_CAPI             TYGetInterfaceList        (TY_INTERFACE_INFO* pIfaceInfos, uint32_t bufferCount, uint32_t* filledCount);

查询接口是否有效。

TY_CAPI             TYHasInterface            (const char* ifaceID, bool* value);

打开接口。

TY_CAPI             TYOpenInterface           (const char* ifaceID, TY_INTERFACE_HANDLE* outHandle);

释放接口句柄。

TY_CAPI             TYCloseInterface          (TY_INTERFACE_HANDLE ifaceHandle);

设备控制

TYUpdateDeviceList 更新指定接口上挂载的设备列表。

TY_CAPI             TYUpdateDeviceList        (TY_INTERFACE_HANDLE ifaceHandle);

TYGetDeviceNumber 获取指定接口上挂载的设备数量。

TY_CAPI             TYGetDeviceNumber         (TY_INTERFACE_HANDLE ifaceHandle, uint32_t* deviceNumber);

TYGetDeviceList 获取指定接口上挂载的设备列表，bufferCount 是按照挂载的设备数量设定的 interface infos array size。

TY_CAPI             TYGetDeviceList           (TY_INTERFACE_HANDLE ifaceHandle, TY_DEVICE_BASE_INFO* deviceInfos, uint32_t bufferCount, uint32_t* filledDeviceCount);

TYHasDevice 查询指定接口和设备 ID 的设备状态。每一台 Percipio 相机拥有独立的设备 ID。

TY_CAPI             TYHasDevice               (TY_INTERFACE_HANDLE ifaceHandle, const char* deviceID, bool* value);

TYOpenDevice 打开设备。输入接口句柄和指定的设备 ID，获得打开的相机设备的句柄。

TY_CAPI             TYOpenDevice              (TY_INTERFACE_HANDLE ifaceHandle, const char* deviceID, TY_DEV_HANDLE* outDeviceHandle, TY_FW_ERRORCODE* outFwErrorcode);

TYOpenDeviceWithIP 在已知指定设备的 IP 地址时，可以使用该接口打开指定 IP 地址的网络相机。输入接口句柄和 IP 地址，获得打开网络相机的句柄。

TY_CAPI             TYOpenDeviceWithIP        (TY_INTERFACE_HANDLE ifaceHandle, const char* IP, TY_DEV_HANDLE* deviceHandle);

TYGetDeviceInterface 使用已知设备的句柄，查询该设备挂载的接口的句柄。

TY_CAPI             TYGetDeviceInterface      (TY_DEV_HANDLE hDevice, TY_INTERFACE_HANDLE* pIface);

TYForceDeviceIP 强制设定网络相机的 IP 地址。已知网络相机的 MAC 地址时，可以通过该接口强制相机临时使用指定的 IP 地址和网关；设备重新启动后，该 IP 配置失效。

TY_CAPI             TYForceDeviceIP           (TY_INTERFACE_HANDLE ifaceHandle, const char* MAC, const char* newIP, const char* newNetMask, const char* newGateway);

TYCloseDevice 关闭指定设备。

TY_CAPI             TYCloseDevice             (TY_DEV_HANDLE hDevice, bool reboot);

TYGetDeviceInfo 输入设备句柄，查询设备信息，如接口、版本、厂商等信息。

TY_CAPI             TYGetDeviceInfo           (TY_DEV_HANDLE hDevice, TY_DEVICE_BASE_INFO* info);

设备信息包含以下数据：

typedef struct TY_DEVICE_BASE_INFO
{
    TY_INTERFACE_INFO   iface;
    char                id[32];///<device serial number
    char                vendorName[32];
    char                userDefinedName[32];
    char                modelName[32];///<device model name
    TY_VERSION_INFO     hardwareVersion; ///<deprecated
    TY_VERSION_INFO     firmwareVersion;///<deprecated
    union {
      TY_DEVICE_NET_INFO netInfo;
      TY_DEVICE_USB_INFO usbInfo;
    };
    char                buildHash[256];
    char                configVersion[256];
    char                reserved[256];
}TY_DEVICE_BASE_INFO;

打开设备的一般操作如下：

LOGD("Init lib");
ASSERT_OK( TYInitLib() );
TY_VERSION_INFO ver;
ASSERT_OK( TYLibVersion(&ver) );
LOGD("     - lib version: %d.%d.%d", ver.major, ver.minor, ver.patch);

std::vector<TY_DEVICE_BASE_INFO> selected;
ASSERT_OK( selectDevice(TY_INTERFACE_ALL, ID, IP, 1, selected) );
ASSERT(selected.size() > 0);
TY_DEVICE_BASE_INFO& selectedDev = selected[0];

ASSERT_OK( TYOpenInterface(selectedDev.iface.id, &hIface) );
ASSERT_OK( TYOpenDevice(hIface, selectedDev.id, &handle) );

其中， select 函数封装如下：

static inline TY_STATUS selectDevice(TY_INTERFACE_TYPE iface
    , const std::string& ID, const std::string& IP
    , uint32_t deviceNum, std::vector<TY_DEVICE_BASE_INFO>& out)
{
    LOGD("Update interface list");
    ASSERT_OK( TYUpdateInterfaceList() );

    uint32_t n = 0;
    ASSERT_OK( TYGetInterfaceNumber(&n) );
    LOGD("Got %u interface list", n);
    if(n == 0){
      LOGE("interface number incorrect");
      return TY_STATUS_ERROR;
    }

    std::vector<TY_INTERFACE_INFO> ifaces(n);
    ASSERT_OK( TYGetInterfaceList(&ifaces[0], n, &n) );
    ASSERT( n == ifaces.size() );
    for(uint32_t i = 0; i < n; i++){
      LOGI("Found interface %u:", i);
      LOGI("  name: %s", ifaces[i].name);
      LOGI("  id:   %s", ifaces[i].id);
      LOGI("  type: 0x%x", ifaces[i].type);
      if(TYIsNetworkInterface(ifaces[i].type)){
        LOGI("    MAC: %s", ifaces[i].netInfo.mac);
        LOGI("    ip: %s", ifaces[i].netInfo.ip);
        LOGI("    netmask: %s", ifaces[i].netInfo.netmask);
        LOGI("    gateway: %s", ifaces[i].netInfo.gateway);
        LOGI("    broadcast: %s", ifaces[i].netInfo.broadcast);
      }
    }

    out.clear();
    std::vector<TY_INTERFACE_TYPE> ifaceTypeList;
    ifaceTypeList.push_back(TY_INTERFACE_USB);
    ifaceTypeList.push_back(TY_INTERFACE_ETHERNET);
    ifaceTypeList.push_back(TY_INTERFACE_IEEE80211);
    for(size_t t = 0; t < ifaceTypeList.size(); t++){
      for(uint32_t i = 0; i < ifaces.size(); i++){
        if(ifaces[i].type == ifaceTypeList[t] && (ifaces[i].type & iface) && deviceNum > out.size()){
          TY_INTERFACE_HANDLE hIface;
          ASSERT_OK( TYOpenInterface(ifaces[i].id, &hIface) );
          ASSERT_OK( TYUpdateDeviceList(hIface) );
          uint32_t n = 0;
          TYGetDeviceNumber(hIface, &n);
          if(n > 0){
            std::vector<TY_DEVICE_BASE_INFO> devs(n);
            TYGetDeviceList(hIface, &devs[0], n, &n);
            for(uint32_t j = 0; j < n; j++){
              if(deviceNum > out.size() && ((ID.empty() && IP.empty())
                  || (!ID.empty() && devs[j].id == ID)
                  || (!IP.empty() && IP == devs[j].netInfo.ip)))
              {
                if (devs[j].iface.type == TY_INTERFACE_ETHERNET || devs[j].iface.type == TY_INTERFACE_IEEE80211) {
                  LOGI("*** Select %s on %s, ip %s", devs[j].id, ifaces[i].id, devs[j].netInfo.ip);
                } else {
                  LOGI("*** Select %s on %s", devs[j].id, ifaces[i].id);
                }
                out.push_back(devs[j]);
              }
            }
          }
          TYCloseInterface(hIface);
        }
      }
    }

    if(out.size() == 0){
      LOGE("not found any device");
      return TY_STATUS_ERROR;
    }

    return TY_STATUS_OK;
}

关闭设备的一般操作如下：

ASSERT_OK( TYCloseDevice(hDevice));
ASSERT_OK( TYCloseInterface(hIface) );

组件控制

TYGetComponentIDs 查询设备支持的组件。

TY_CAPI             TYGetComponentIDs         (TY_DEV_HANDLE hDevice, int32_t* componentIDs);

TYGetEnabledComponents 查询已使能的组件。

TY_CAPI             TYGetEnabledComponents    (TY_DEV_HANDLE hDevice, int32_t* componentIDs);

TYEnableComponents 使能指定的设备组件。

TY_CAPI             TYEnableComponents        (TY_DEV_HANDLE hDevice, int32_t componentIDs);

TYDisableComponents 关闭指定的设备组件。

TY_CAPI             TYDisableComponents       (TY_DEV_HANDLE hDevice, int32_t componentIDs);

示例：查询并使能左右红外图像传感器和彩色图像传感器。

int32_t allComps;
ASSERT_OK( TYGetComponentIDs(hDevice, &allComps) );
if(allComps & TY_COMPONENT_RGB_CAM  && color) {
    LOGD("Has RGB camera, open RGB cam");
    ASSERT_OK( TYEnableComponents(hDevice, TY_COMPONENT_RGB_CAM) );
}

if (allComps & TY_COMPONENT_IR_CAM_LEFT && ir) {
    LOGD("Has IR left camera, open IR left cam");
    ASSERT_OK(TYEnableComponents(hDevice, TY_COMPONENT_IR_CAM_LEFT));
}

if (allComps & TY_COMPONENT_IR_CAM_RIGHT && ir) {
    LOGD("Has IR right camera, open IR right cam");
    ASSERT_OK(TYEnableComponents(hDevice, TY_COMPONENT_IR_CAM_RIGHT));
}

帧缓冲管理

TYGetFrameBufferSize 获取当前设备配置需要的帧缓冲空间大小。同一相机，工作在不同图像数据输出模式下，需要的帧缓冲区大小不同。

TY_CAPI             TYGetFrameBufferSize      (TY_DEV_HANDLE hDevice, uint32_t* bufferSize);

TYEnqueueBuffer 把分配的帧缓冲推入缓冲队列。

TY_CAPI             TYEnqueueBuffer           (TY_DEV_HANDLE hDevice, void* buffer, uint32_t bufferSize);

TYClearBufferQueue 清空帧缓冲区的缓冲队列。在系统运行过程中，动态调整组件个数时，需要清除 SDK 内部的缓冲队列，并重新申请和推入缓冲队列。

TY_CAPI             TYClearBufferQueue        (TY_DEV_HANDLE hDevice);

示例：查询帧缓冲的大小，分配 2 帧缓冲并推入帧缓冲队列。

uint32_t frameSize;
ASSERT_OK( TYGetFrameBufferSize(hDevice, &frameSize) );

LOGD("     - Allocate & enqueue buffers");
char* frameBuffer[2];
frameBuffer[0] = new char[frameSize];
frameBuffer[1] = new char[frameSize];
LOGD("     - Enqueue buffer (%p, %d)", frameBuffer[0], frameSize);
ASSERT_OK( TYEnqueueBuffer(hDevice, frameBuffer[0], frameSize) );
LOGD("     - Enqueue buffer (%p, %d)", frameBuffer[1], frameSize);
ASSERT_OK( TYEnqueueBuffer(hDevice, frameBuffer[1], frameSize) );

对时设定

TY_ENUM_TIME_SYNC_TYPE = 0x0211 | TY_FEATURE_ENUM,

TY_BOOL_TIME_SYNC_READY = 0x0212 | TY_FEATURE_BOOL,

设置深度相机对时类型，枚举型属性。确认对时设置，布尔型属性。深度相机支持与 HOST、NTP 服务器、 PTP 服务器或 CAN 对时。

默认设置：

若深度相机无 CAN，默认设置为不启用对时功能 TY_TIME_SYNC_TYPE_NONE。

若深度相机有 CAN，默认设置为与 CAN 对时 TY_TIME_SYNC_TYPE_CAN。

定义：

typedef enum TY_TIME_SYNC_TYPE_LIST
{
    TY_TIME_SYNC_TYPE_NONE = 0,
    TY_TIME_SYNC_TYPE_HOST = 1,
    TY_TIME_SYNC_TYPE_NTP = 2,
    TY_TIME_SYNC_TYPE_PTP = 3,
    TY_TIME_SYNC_TYPE_CAN = 4,
    TY_TIME_SYNC_TYPE_PTP_MASTER = 5,
}TY_TIME_SYNC_TYPE_LIST;
typedef int32_t TY_TIME_SYNC_TYPE;

操作：通过 TYSetEnum() 的接口设置对时类型，再通过读取 TY_BOOL_TIME_SYNC_READY 确认是否完成对时。

示例：设置对时类型为与 HOST 对时。设置该对时类型后，主机自动下发当前时间，随后每隔 6s下发对时一次。

LOGD("Set type of time sync mechanism");
ASSERT_OK(TYSetEnum(hDevice, TY_COMPONENT_DEVICE, TY_ENUM_TIME_SYNC_TYPE, TY_TIME_SYNC_TYPE_HOST));
LOGD("Wait for time sync ready");
while (1) {
    bool sync_ready;
    ASSERT_OK(TYGetBool(hDevice, TY_COMPONENT_DEVICE, TY_BOOL_TIME_SYNC_READY, &sync_ready));
    if (sync_ready) {
        break;
    }
    MSLEEP(10);
}

工作模式配置

TY_STRUCT_TRIGGER_PARAM = 0x0523 | TY_FEATURE_STRUCT,

深度相机的工作模式配置。结构体属性。定义如下：

typedef enum TY_TRIGGER_MODE_LIST
{
    TY_TRIGGER_MODE_OFF         = 0,
    TY_TRIGGER_MODE_SLAVE       = 1,
    TY_TRIGGER_MODE_M_SIG       = 2,
    TY_TRIGGER_MODE_M_PER       = 3,
    TY_TRIGGER_MODE_SIG_PASS    = 18,
    TY_TRIGGER_MODE_PER_PASS    = 19,
    TY_TRIGGER_MODE_TIMER_LIST  = 20,
    TY_TRIGGER_MODE_TIMER_PERIOD= 21,
}TY_TRIGGER_MODE_LIST;

typedef int16_t TY_TRIGGER_MODE;
typedef struct TY_TRIGGER_PARAM
{
    TY_TRIGGER_MODE   mode;
    int8_t    fps;
    int8_t    rsvd;
}TY_TRIGGER_PARAM;

//@see sample SimpleView_TriggerMode, only for TY_TRIGGER_MODE_SIG_PASS/TY_TRIGGER_MODE_PER_PASS
typedef struct TY_TRIGGER_PARAM_EX
{
    TY_TRIGGER_MODE   mode;
    union
    {
        struct
        {
            int8_t    fps;
            int8_t    duty;
            int32_t   laser_stream;
            int32_t   led_stream;
            int32_t   led_expo;
            int32_t   led_gain;
        };
        struct
        {
            int32_t   ir_gain[2];
        };
        int32_t   rsvd[32];
    };
}TY_TRIGGER_PARAM_EX;

//@see sample SimpleView_TriggerMode, only for TY_TRIGGER_MODE_TIMER_LIST

TY_TRIGGER_MODE_OFF 配置深度相机工作在模式 0，相机连续采集图像并以最高帧率输出图像数据。

LOGD("=== Disable trigger mode");
TY_TRIGGER_PARAM trigger;
trigger.mode = TY_TRIGGER_MODE_OFF;
ASSERT_OK(TYSetStruct(hDevice, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_PARAM, &trigger, sizeof(trigger)));

TY_TRIGGER_MODE_SLAVE 配置深度相机工作在模式 1，相机收到软触发指令或者硬件触发信号后采集图像并输出图像数据。

LOGD("=== Set trigger to slave mode");
TY_TRIGGER_PARAM trigger;
trigger.mode = TY_TRIGGER_MODE_SLAVE;
ASSERT_OK(TYSetStruct(hDevice, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_PARAM, &trigger, sizeof(trigger)));

TY_TRIGGER_MODE_M_SIG 配置主设备（相机）工作在模式 2，多台从设备（相机）工作在模式 1，以实现多台深度相机级联触发，同时采集图像。

主设备收到上位机发送的软件触发信号后，通过硬件 TRIGGER OUT 接口输出触发信号，同时触发自身采集并输出深度图；从设备收到主设备的硬件触发信号后，采集并输出深度图。

LOGD("=== Set trigger mode");
if (((strcmp(selected[i].id, list[0]) == 0) && (list.size() > 0))
        || ((count == 0) && (list.size() == 0))) {
    LOGD("=== set master device, id: %s", cams[count].sn);
    cams[count].tag = std::string(cams[count].sn) + "_master";
    TY_TRIGGER_PARAM param;
    param.mode = TY_TRIGGER_MODE_M_SIG;
    ASSERT_OK(TYSetStruct(cams[count].hDev, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_PARAM, (void*)&param, sizeof(param)));
} else {
    cams[count].tag = std::string(cams[count].sn) + "_slave";
    TY_TRIGGER_PARAM param;
    param.mode = TY_TRIGGER_MODE_SLAVE;
    ASSERT_OK(TYSetStruct(cams[count].hDev, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_PARAM, (void*)&param, sizeof(param)));
}

TY_TRIGGER_MODE_M_PER 配置主设备（相机）工作在模式 3，多台从设备（相机）工作在模式 1，以实现多台深度相机按照设置的帧率级联触发，同时采集图像。

主设备按照设置的帧率，通过硬件 TRIGGER OUT 接口输出触发信号，同时触发自身采集并输出深度图；从设备收到主设备的硬件触发信号后，采集并输出深度图。

Note

设置的帧率不可大于 15，且不能超过相机处理能力（工作模式 0 下相机的出图帧率）。
在工作模式 3 下（不连接从设备），主设备可以按照设置的帧率平滑的输出图像，适用于需要特定帧率接收图像或者图像数据处理能力有限的平台。

LOGD("=== Set trigger mode");

if (((strcmp(selected[i].id, list[0]) == 0) && (list.size() > 0))
    || ((count == 0) && (list.size() == 0))) {
    LOGD("=== set master device");
    cams[count].tag = std::string(cams[count].sn) + "_master";
    TY_TRIGGER_PARAM param;
    param.mode = TY_TRIGGER_MODE_M_PER;
    param.fps = 5;
    ASSERT_OK(TYSetStruct(cams[count].hDev, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_PARAM, (void*)&param, sizeof(param)));
}
else {
    cams[count].tag = std::string(cams[count].sn) + "_slave";
    TY_TRIGGER_PARAM param;
    param.mode = TY_TRIGGER_MODE_SLAVE;
    ASSERT_OK(TYSetStruct(cams[count].hDev, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_PARAM, (void*)&param, sizeof(param)));
}

TY_TRIGGER_MODE_SIG_PASS 配置深度相机工作在模式 18，相机每接收到一次软触发指令或硬触发信号后，便按照设置的帧率，以 1+duty 的方式采集一轮图像并输出图像数据（1：出 1 次泛光；duty：出 duty 次激光）。

Note

设置的帧率不能超过相机处理能力，即工作模式 0 下相机的出图帧率。

LOGD("=== Set trigger to trig mode 18");
TY_TRIGGER_PARAM_EX trigger;
trigger.mode = TY_TRIGGER_MODE_SIG_PASS;
trigger.fps = 10;           // [1, 15]
trigger.duty = duty;
trigger.laser_stream = TY_COMPONENT_DEPTH_CAM | TY_COMPONENT_RGB_CAM;
trigger.led_stream = TY_COMPONENT_IR_CAM_LEFT | TY_COMPONENT_RGB_CAM;
trigger.led_expo = 1088;    // [3, 1088]
trigger.led_gain = 32;      // [0, 255]
ASSERT_OK(TYSetStruct(hDevice, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_PARAM_EX, &trigger, sizeof(trigger)));

TY_TRIGGER_MODE_PER_PASS 配置深度相机工作在模式 19，相机接收到一次软触发或者硬触发信号后，便按照设置的帧率，以 1+duty 的方式连续采集图像并输出图像数据（1：出 1 次泛光；duty：出 duty 次激光）。

Note

设置的帧率不能超过相机处理能力，即工作模式 0 下相机的出图帧率。

LOGD("=== Set trigger to trig mode 19");
TY_TRIGGER_PARAM_EX trigger;
trigger.mode = TY_TRIGGER_MODE_PER_PASS;
trigger.fps = 10;           // [1, 15]
trigger.duty = duty;
trigger.laser_stream = TY_COMPONENT_DEPTH_CAM | TY_COMPONENT_RGB_CAM;
trigger.led_stream = TY_COMPONENT_IR_CAM_LEFT | TY_COMPONENT_RGB_CAM;
trigger.led_expo = 1088;    // [3,1088]
trigger.led_gain = 32;      // [0, 255]
ASSERT_OK(TYSetStruct(hDevice, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_PARAM_EX, &trigger, sizeof(trigger)));

TY_TRIGGER_MODE_TIMER_LIST 配置深度相机工作在模式 20（列表式定时触发模式），相机根据设置的触发开始时间（start_time_us）、触发次数（offset_us_count）和每两帧的时间间隔数组（offset_us_list[ ]），定时采集（1 + offset_us_count）张图像并输出图像数据。此工作模式要求相机先启动 PTP 对时，详情请参考对时设定。

定义：

typedef struct TY_TRIGGER_TIMER_LIST
{
    uint64_t  start_time_us; // 0 for disable
    uint32_t  offset_us_count; // length of offset_us_list
    uint32_t  offset_us_list[50]; // used in TY_TRIGGER_MODE_TIMER_LIST mode
}TY_TRIGGER_TIMER_LIST;

操作:

通过 TY_TRIGGER_MODE_TIMER_LIST 配置深度相机工作在模式 20。

LOGD("=== Set trigger to trig mode 20");
TY_TRIGGER_PARAM trigger;
trigger.mode = TY_TRIGGER_MODE_TIMER_LIST;
ASSERT_OK(TYSetStruct(hDevice, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_PARAM, &trigger, sizeof(trigger)));

通过 TY_TRIGGER_TIMER_LIST 设置一个列表触发定时器，offset_us_count ≤ 50。

LOGD("=== Set trigger timer list");
TY_TRIGGER_TIMER_LIST list_timer;
list_timer.start_time_us = (getSystemTime() + 3000) * 1000;
list_timer.offset_us_count = 4;
list_timer.offset_us_list[0] = 1000000;
list_timer.offset_us_list[1] = 1000000;
list_timer.offset_us_list[2] = 1000000;
list_timer.offset_us_list[3] = 1000000;
ASSERT_OK(TYSetStruct(hDevice, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_TIMER_LIST, &list_timer, sizeof(list_timer)));

若需关闭列表触发定时器，则将 start_time_us 设置为 0。

TY_TRIGGER_TIMER_LIST list_timer;
list_timer.start_time_us = 0;
ASSERT_OK(TYSetStruct(hDevice, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_TIMER_LIST, & list_timer, sizeof(list_timer)));

TY_TRIGGER_MODE_TIMER_PERIOD 配置深度相机工作在模式 21（周期式定时触发模式），相机根据设置触发开始时间（start_time_us）、触发次数（trigger_count）和触发时间间隔（peroid_us），每间隔 peroid_us 采集⼀帧图像，共采集 trigger_count 张图像并输出图像数据。此工作模式要求相机先启动 PTP 对时，详情请参考对时设定。

定义：

typedef struct TY_TRIGGER_TIMER_PERIOD
{
    uint64_t  start_time_us; // 0 for disable
    uint32_t  trigger_count;
    uint32_t  period_us; // used in TY_TRIGGER_MODE_TIMER_PERIOD mode
}TY_TRIGGER_TIMER_PERIOD;

操作:

通过 TY_TRIGGER_MODE_TIMER_PERIOD 配置深度相机工作在模式 21。

LOGD("=== Set trigger to trig mode 21");
TY_TRIGGER_PARAM trigger;
trigger.mode = TY_TRIGGER_MODE_TIMER_PERIOD;
ASSERT_OK(TYSetStruct(hDevice, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_PARAM, &trigger, sizeof(trigger)));

通过 TY_TRIGGER_TIMER_PERIOD 设置一个周期触发定时器。

TY_TRIGGER_TIMER_PERIOD period_timer;
period_timer.start_time_us = (getSystemTime() + 3000) * 1000;
period_timer.trigger_count = 10;
period_timer.period_us = 1000000;
ASSERT_OK(TYSetStruct(hDevice, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_TIMER_PERIOD, &period_timer, sizeof(period_timer)));

若需关闭周期触发定时器，则将 start_time_us 设置为 0。

TY_TRIGGER_TIMER_PERIOD period_timer;
period_timer.start_time_us = 0;
ASSERT_OK(TYSetStruct(hDevice, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_TIMER_PERIOD, & period_timer, sizeof(period_timer)));

启停管理

TYStartCapture 设备组件、组件特性功能配置完成后，调用该接口启动设备，开始图像采集和计算输出，运行结束后调用 TYStopCapture 停止图像采集操作。

TY_CAPI             TYStartCapture            (TY_DEV_HANDLE hDevice);
TY_CAPI             TYStopCapture             (TY_DEV_HANDLE hDevice);

软件触发

TYSendSoftTrigger 相机设备工作于模式 1、模式 2 时（请参考工作模式），可以使用软件触发接口函数 TYSendSoftTrigger()，通过 USB 接口或者以太网接口发送触发指令到深度相机，相机接收到该指令后进行一次图像采集和深度计算，并输出相应图像数据。

TY_CAPI             TYSendSoftTrigger         (TY_DEV_HANDLE hDevice);

状态报告

设备掉线或者设备 License 状态异常时，该回调函数可以收到 TY_EVENT_DEVICE_OFFLINE 或 TY_EVENT_LICENSE_ERROR 事件通知。

TY_CAPI             TYRegisterEventCallback   (TY_DEV_HANDLE hDevice, TY_EVENT_CALLBACK callback, void* userdata);

数据接收

深度相机通过 USB 接口或者以太网接口输出深度数据，上位机通过 SDK 的 FetchFrame (主动获取) API 获取深度图像数据。

深度相机的数据输出与上位机之间通过 frameBuffer Queue 进行缓冲。在 Queue 中的 frameBuffer 全部被占用的情况下，深度相机会停止数据发送。为避免相机发送的图像数据流被阻塞，上位机获取图像数据后，应及时调用 TYEnqueueBuffer 归还 frameBuffer。

如果上位机接收或者数据处理能力低于深度相机的图像输出能力，可使用软件触发或者硬件触发的方式限制图像计算和输出的帧率，同时也可以降低相机功耗。SDK 示例程序 SimpleView_Callback 和 SimpleView_FetchFrame 分别提供了在独立应用线程进行图像应用处理和直接在图像收取线程中进行图像应用处理的两种框架示例。

FetchFrame 数据接收函数，输入设备句柄并在指定的时间内等待有效数据帧，指定时间内没有收到数据帧，函数会返回并报告错误状态。

TY_CAPI             TYFetchFrame              (TY_DEV_HANDLE hDevice, TY_FRAME_DATA* frame, int32_t timeout);

属性设置

属性有无查询

TYHasFeature 输入设备句柄、组件 ID，查询是否支持 featureID 对应的属性。

TY_CAPI             TYHasFeature              (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, bool* value);

属性信息查询

TYGetFeatureInfo 输入设备句柄、组件 ID，查询 featureID 对应属性的信息。

TY_CAPI             TYGetFeatureInfo          (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, TY_FEATURE_INFO* featureInfo);

属性的信息包括：访问属性（TY_ACCESS_MODE，读、写）、是否支持图像运行时配置以及该属性相关联的组件和其他属性 ID。

typedef struct TY_FEATURE_INFO
{
    bool            isValid;            ///< true if feature exists, false otherwise
    TY_ACCESS_MODE  accessMode;         ///< feature access privilege
    bool            writableAtRun;      ///< feature can be written while capturing
    char            reserved0[1];
    TY_COMPONENT_ID componentID;        ///< owner of this feature
    TY_FEATURE_ID   featureID;          ///< feature unique id
    char            name[32];           ///< describe string
    int32_t         bindComponentID;    ///< component ID current feature bind to
    int32_t         bindFeatureID;      ///< feature ID current feature bind to
    char            reserved[252];
}TY_FEATURE_INFO;

属性分类操作接口

属性操作 API 通常包含的输入参数有相机句柄 hDevice、属性所属组件的 ID componentID、待操作属性 ID featureID、待接收或者写入的数据参数，依据不同的属性类型选择不同的操作 API，即遵循相机、组件、属性的隶属关系和属性类型进行操作。

组件属性的数据类型共有 7 种，SDK 使用同一个 API 对同一类型的不同属性进行操作。

typedef enum TY_FEATURE_TYPE_LIST
{
    TY_FEATURE_INT              = 0x1000,
    TY_FEATURE_FLOAT            = 0X2000,
    TY_FEATURE_ENUM             = 0x3000,
    TY_FEATURE_BOOL             = 0x4000,
    TY_FEATURE_STRING           = 0x5000,
    TY_FEATURE_BYTEARRAY        = 0x6000,
    TY_FEATURE_STRUCT           = 0x7000,
}TY_FEATURE_TYPE_LIST;

整型属性的操作接口：

TY_CAPI             TYGetIntRange             (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, TY_INT_RANGE* intRange);
TY_CAPI             TYGetInt                  (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, int32_t* value);
TY_CAPI             TYSetInt                  (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, int32_t value);

浮点型属性的操作接口：

TY_CAPI             TYGetFloatRange           (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, TY_FLOAT_RANGE* floatRange);
TY_CAPI             TYGetFloat                (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, float* value);
TY_CAPI             TYSetFloat                (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, float value);

枚举型属性的操作接口：

TY_CAPI             TYGetEnumEntryCount       (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, uint32_t* entryCount);
TY_CAPI             TYGetEnumEntryInfo        (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, TY_ENUM_ENTRY* entries, uint32_t entryCount, uint32_t* filledEntryCount);
TY_CAPI             TYGetEnum                 (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, int32_t* value);
TY_CAPI             TYSetEnum                 (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, int32_t value);

布尔型属性的操作接口：

TY_CAPI             TYGetBool                 (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, bool* value);
TY_CAPI             TYSetBool                 (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, bool value);

字符串型属性的操作接口：

TY_CAPI             TYGetStringLength         (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, uint32_t* length);
TY_CAPI             TYGetString               (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, char* buffer, uint32_t bufferSize);
TY_CAPI             TYSetString               (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, const char* buffer);

结构体型属性的操作接口：

TY_CAPI             TYGetStruct               (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, void* pStruct, uint32_t structSize);
TY_CAPI             TYSetStruct               (TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, void* pStruct, uint32_t structSize);

属性说明

不同型号的 Percipio 深度相机拥有不同的属性配置，通过遍历深度相机的组件和属性列表，可以获取产品准确的配置信息。建议使用 SDK 示例程序 DumpAllFeatures 遍历设备支持的属性。

组件光学参数

TY_STRUCT_CAM_INTRINSIC = 0x0000 | TY_FEATURE_STRUCT,

红外图像传感器组件、彩色图像传感器组件、深度图像传感器组件的内参。结构体型属性，数据结构为 3x3 浮点数组。定义如下：
```
///  a 3x3 matrix
/// |.|.|.|
/// | --|---|---|
/// | fx|  0| cx|
/// |  0| fy| cy|
/// |  0|  0|  1|
typedef struct TY_CAMERA_INTRINSIC
{
    float data[3*3];
}TY_CAMERA_INTRINSIC;
```

TY_STRUCT_EXTRINSIC_TO_LEFT_IR = 0x0001 | TY_FEATURE_STRUCT,

组件外参。右侧红外图像传感器组件或者彩色图像传感器组件相对左侧红外图像传感器组件的外参数据。结构体型属性，数据结构为 4x4 浮点数组。定义如下：

/// a 4x4 matrix
///  |.|.|.|.|
///  |---|----|----|---|
///  |r11| r12| r13| t1|
///  |r21| r22| r23| t2|
///  |r31| r32| r33| t3|
///  | 0 |   0|   0|  1|
// 该参数用于初始坐标系中的坐标点向新的坐标系转换
// R11  R12  R13  T1分别为x在新的坐标系中x y z三轴的旋转系数及偏移量
// R21  R22  R23  T2分别为y在新的坐标系中x y z三轴的旋转系数及偏移量
// R31  R32  R33  T3分别为z在新的坐标系中x y z三轴的旋转系数及偏移量
typedef struct TY_CAMERA_EXTRINSIC
{
    float data[4*4];
}TY_CAMERA_EXTRINSIC;

[r11, r12, r13, t1,
 r21, r22, r23, t2,
 r31, r32, r33, t3,
 0,   0,   0,  1]

TY_STRUCT_CAM_DISTORTION = 0x0006 | TY_FEATURE_STRUCT,

红外图像传感器或者彩色图像传感器组件的光学畸变参数。结构体型属性，数据结构为 12 个元素的浮点数组。定义如下：

// k1 k2 k3 k4 k5 k6是基于理想模型的径向畸变系数
// p1 p2 为切向畸变系数
// s1 s2 s3 s4 为薄棱镜畸变系数
///camera distortion parameters
typedef struct TY_CAMERA_DISTORTION
{
    float data[12];///<Definition is compatible with opencv3.0+ :k1,k2,p1,p2,k3,k4,k5,k6,s1,s2,s3,s4
}TY_CAMERA_DISTORTION;

TY_STRUCT_CAM_CALIB_DATA = 0x0007 | TY_FEATURE_STRUCT,

红外图像传感器组件、彩色图像传感器组件的标定参数组合，可获取内参数据、外参数据和畸变数据。结构体内包含相机出厂前标定的标定尺寸，内参，外参，畸变参数。该标定参数是在特定分辨率下标定计算出来的，与图像的分辨率存在转换关系。SDK 提供的相关 API 会根据实际图像分辨率自动调整输出的参数。

typedef struct TY_CAMERA_CALIB_INFO
{
  int32_t intrinsicWidth;
  int32_t intrinsicHeight;
  TY_CAMERA_INTRINSIC   intrinsic;  // TY_STRUCT_CAM_INTRINSIC
  TY_CAMERA_EXTRINSIC   extrinsic;  // TY_STRUCT_EXTRINSIC_TO_LEFT_IR
  TY_CAMERA_DISTORTION  distortion; // TY_STRUCT_CAM_DISTORTION
}TY_CAMERA_CALIB_INFO;

示例：获取标定参数，详情请参考 SDK 示例程序 SimpleView_Registration。

struct CallbackData {
  int             index;
  TY_ISP_HANDLE   IspHandle;
  TY_DEV_HANDLE   hDevice;
  DepthRender*    render;
  DepthViewer*    depthViewer;
  bool            needUndistort;

  float           scale_unit;

  TY_CAMERA_CALIB_INFO depth_calib;
  TY_CAMERA_CALIB_INFO color_calib;
};

CallbackData cb_data;

LOGD("=== Read depth calib info");
ASSERT_OK( TYGetStruct(hDevice, TY_COMPONENT_DEPTH_CAM, TY_STRUCT_CAM_CALIB_DATA
      , &cb_data.depth_calib, sizeof(cb_data.depth_calib)) );

LOGD("=== Read color calib info");
ASSERT_OK( TYGetStruct(hDevice, TY_COMPONENT_RGB_CAM, TY_STRUCT_CAM_CALIB_DATA
      , &cb_data.color_calib, sizeof(cb_data.color_calib)) );

网络相关属性

TY_INT_PERSISTENT_IP = 0x0010 | TY_FEATURE_INT,

网络深度相机的静态 IP 地址。
TY_INT_PERSISTENT_SUBMASK = 0x0011 | TY_FEATURE_INT,

网络深度相机的静态 IP 地址掩码。

TY_INT_PERSISTENT_GATEWAY = 0x0012 | TY_FEATURE_INT,

网络深度相机的静态 IP 网关。

const char * newIP = "0.0.0.0";
const char * newNetmask = "0.0.0.0";
const char * newGateway = "0.0.0.0";

int32_t ip_i[4];
uint8_t ip_b[4];
int32_t ip32;
sscanf(newIP, "%d.%d.%d.%d", &ip_i[0], &ip_i[1], &ip_i[2], &ip_i[3]);
ip_b[0] = ip_i[0];ip_b[1] = ip_i[1];ip_b[2] = ip_i[2];ip_b[3] = ip_i[3];
ip32 = TYIPv4ToInt(ip_b);
LOGI("Set persistent IP 0x%x(%d.%d.%d.%d)", ip32, ip_b[0], ip_b[1], ip_b[2], ip_b[3]);
ASSERT_OK( TYSetInt(hDevice, TY_COMPONENT_DEVICE, TY_INT_PERSISTENT_IP, ip32) );
sscanf(newNetmask, "%d.%d.%d.%d", &ip_i[0], &ip_i[1], &ip_i[2], &ip_i[3]);
ip_b[0] = ip_i[0];ip_b[1] = ip_i[1];ip_b[2] = ip_i[2];ip_b[3] = ip_i[3];
ip32 = TYIPv4ToInt(ip_b);
LOGI("Set persistent Netmask 0x%x(%d.%d.%d.%d)", ip32, ip_b[0], ip_b[1], ip_b[2], ip_b[3]);
ASSERT_OK( TYSetInt(hDevice, TY_COMPONENT_DEVICE, TY_INT_PERSISTENT_SUBMASK, ip32) );
sscanf(newGateway, "%d.%d.%d.%d", &ip_i[0], &ip_i[1], &ip_i[2], &ip_i[3]);
ip_b[0] = ip_i[0];ip_b[1] = ip_i[1];ip_b[2] = ip_i[2];ip_b[3] = ip_i[3];
ip32 = TYIPv4ToInt(ip_b);
LOGI("Set persistent Gateway 0x%x(%d.%d.%d.%d)", ip32, ip_b[0], ip_b[1], ip_b[2], ip_b[3]);
ASSERT_OK( TYSetInt(hDevice, TY_COMPONENT_DEVICE, TY_INT_PERSISTENT_GATEWAY, ip32) );

TY_BOOL_GVSP_RESEND = 0x0013 | TY_FEATURE_BOOL,

网络深度相机的图像数据流重传开关。默认图像数据流不做重传。
TY_INT_PACKET_DELAY = 0x0014 | TY_FEATURE_INT, ///< microseconds

网络深度相机的数据传输的延时等待时间，用于缓冲网络数据发送雍塞。默认为 100 微秒。
TY_INT_PACKET_SIZE = 0x0017 | TY_FEATURE_INT,

网络深度相机数据传输时，分组发送到链路上最大传输单元的大小，范围 100 ~ 1500，默认为 1500。
TY_INT_ACCEPTABLE_PERCENT = 0x0015 | TY_FEATURE_INT,

网络深度相机的丢包率门槛，超过该门槛开启重传。
TY_INT_NTP_SERVER_IP = 0x0016 | TY_FEATURE_INT,

网络深度相机的 NTP 服务器 IP 地址，默认使用时间服务器为 cn.ntp.org.cn。

TY_STRUCT_CAM_STATISTICS = 0x00ff | TY_FEATURE_STRUCT,

网络深度相机统计数据信息。结构体型属性，定义如下：

typedef struct TY_CAMERA_STATISTICS
{
    uint64_t   packetReceived;
    uint64_t   packetLost;
    uint64_t   imageOutputed;
    uint64_t   imageDropped;
    uint8_t   rsvd[1024];
}TY_CAMERA_STATISTICS;

触发设置

TY_ENUM_TRIGGER_POL = 0x0201 | TY_FEATURE_ENUM,

深度相机的触发信号设定。枚举型属性。深度相机支持下降沿触发和上升沿触发，默认设置是下降沿触发。定义如下：
```
typedef enum TY_TRIGGER_POL_LIST
{
    TY_TRIGGER_POL_FALLINGEDGE = 0,
    TY_TRIGGER_POL_RISINGEDGE  = 1,
}TY_TRIGGER_POL_LIST;
```
TY_INT_FRAME_PER_TRIGGER = 0x0202 | TY_FEATURE_INT,

深度相机接收到一次软触发指令或者硬件触发信号后，输出的图像的帧数量。默认输出 1 帧。

TY_INT_TRIGGER_DELAY_US = 0x0206 | TY_FEATURE_INT,

延迟触发。深度相机收到硬件触发信号后，延时设置的延迟时间后进行图像采集，单位是微秒。最大延迟时间 1300000 微秒。

LOGD("=== Set trigger to slave mode");
TY_TRIGGER_PARAM trigger;
trigger.mode = TY_TRIGGER_MODE_SLAVE;
ASSERT_OK(TYSetStruct(hDevice, TY_COMPONENT_DEVICE, TY_STRUCT_TRIGGER_PARAM, &trigger, sizeof(trigger)));

//notice: trigger delay only be enabled in trigger salve mode and only work for hardware trigger.
//        delay time unit is microsecond, the maximum value is 1.3s
int32_t time = 1000;
ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_DEVICE, TY_INT_TRIGGER_DELAY_US, time));

TY_BOOL_TRIGGER_OUT_IO = 0x0207 | TY_FEATURE_BOOL,

触发 IO 输出控制。在深度相机工作在模式 0 或者模式 1 时，可以通过该属性控制触发输出接口工作在普通 IO 模式。设置该值为 false 时，进入无效触发的状态；设置该值为 true 时，输出有效的触发信号（参考 TY_ENUM_TRIGGER_POL 属性设置）。深度相机工作在模式 2 或者模式 3 时，该属性不能使用。

Note

各种触发模式的硬件连接方式请参考外部触发和工作模式。
软件实现请参考 SDK 示例程序 SimpleView_TriggerMode1。

链路监测

TY_BOOL_KEEP_ALIVE_ONOFF = 0x0203 | TY_FEATURE_BOOL,

深度相机状态保持。SDK 与相机维持通信状态保持机制。默认为 true。一旦发生连接异常，将激活 TYRegisterEventCallback 注册的回调函数。用户可在回调函数中进行重连等异常处理操作。
TY_INT_KEEP_ALIVE_TIMEOUT = 0x0204 | TY_FEATURE_INT, ///< Keep Alive timeout

深度相机状态保持时间设置。在该时间内未收到状态保持数据包，则判定系统与设备的连接出现异常。单位是毫秒。USB 相机默认是 15 秒，网络相机默认 3 秒。

曝光设置

TY_BOOL_AUTO_AWB = 0x0304 | TY_FEATURE_BOOL,

自动白平衡控制。自动白平衡功能适用于彩色图像传感器，通过调整 R、G、B 三个通道的数字增益值实现色彩空间的平衡。若要手动设置 R、G、B 三个通道的数字增益，需先关闭自动白平衡功能，否则自动白平衡功能会与手动设置的 R、G、B 通道数字增益冲突，影响图像效果。
TY_BOOL_AUTO_EXPOSURE = 0x0300 | TY_FEATURE_BOOL,

自动曝光时间控制。彩色图像传感器组件的自动曝光开关。部分深度相机的光学组件支持图像自动曝光。

TY_INT_EXPOSURE_TIME = 0x0301 | TY_FEATURE_INT,

曝光时间。红外或者彩色图像传感器组件的曝光时间设置。不同光学传感器、不同帧率配置下的行曝光时间可配置范围不同，最大行数和最小行数可使用 TYGetIntRange 接口查询。通过 API 设置曝光时间前，如果图像传感器支持自动曝光时间设置，需要关闭自动曝光时间设置功能。

//shutdown the Auto Exposure time function of the rgb image
ASSERT_OK(TYSetBool(hDevice, TY_COMPONENT_RGB_CAM, TY_BOOL_AUTO_EXPOSURE, false));

//Adjust the Exposure time of the rgb image
TY_INT_RANGE range;
ASSERT_OK(TYGetIntRange(hDevice, TY_COMPONENT_RGB_CAM, TY_INT_EXPOSURE_TIME, &range));
int32_t tmp;
ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_RGB_CAM, TY_INT_EXPOSURE_TIME, (range.min + range.max) / 2));
ASSERT_OK(TYGetInt(hDevice, TY_COMPONENT_RGB_CAM, TY_INT_EXPOSURE_TIME, &tmp));
if (tmp != (range.min + range.max) / 2)
{
    LOGD("set rgb image exposure time failed");
}

TY_BOOL_AUTO_GAIN = 0x0302 | TY_FEATURE_BOOL,

自动增益控制。彩色图像传感器组件的自动增益调整开关。部分深度相机的光学组件允许自动调整增益。
TY_INT_ANALOG_GAIN = 0x0524 | TY_FEATURE_INT,

模拟曝光增益。红外或者彩色图像传感器组件的模拟曝光增益设置。不同光学传感器、不同帧率配置下的增益可调范围不同。通过 API 设置彩色图像传感器组件的模拟曝光增益时，需要先关闭自动增益调整功能。
```
ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_IR_CAM_LEFT, TY_INT_ANALOG_GAIN, 4));

//shutdown the Auto Gain function of the RGB image
ASSERT_OK(TYSetBool(hDevice, TY_COMPONENT_RGB_CAM, TY_BOOL_AUTO_GAIN, false));
ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_RGB_CAM, TY_INT_ANALOG_GAIN, 4));
```

TY_INT_GAIN = 0x0303 | TY_FEATURE_INT,

红外传感器数字曝光增益。红外图像传感器组件的数字曝光增益设置。不同光学传感器、不同帧率配置下的增益可调范围不同。

int32_t value;
TY_INT_RANGE range;
// get the range of digital gain
ASSERT_OK(TYGetIntRange(hDevice, TY_COMPONENT_IR_CAM_LEFT, TY_INT_GAIN, &range));
// set the max digital gain
ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_IR_CAM_LEFT, TY_INT_GAIN, range.max));

TY_INT_R_GAIN = 0x0520 | TY_FEATURE_INT,
TY_INT_G_GAIN = 0x0521 | TY_FEATURE_INT,

TY_INT_B_GAIN = 0x0522 | TY_FEATURE_INT,

彩色传感器数字曝光增益。彩色图像传感器模组的数字曝光增益需要通过 R、G、B 三通道独立设置。通过 API 设置增益时，如果传感器支持 AWB 设置，需要先关闭 AWB 功能。

//shutdown the AWB function of the RGB image
ASSERT_OK(TYSetBool(hDevice, TY_COMPONENT_RGB_CAM, TY_BOOL_AUTO_AWB, false));

ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_RGB_CAM, TY_INT_R_GAIN, 2));
ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_RGB_CAM, TY_INT_G_GAIN, 2));
ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_RGB_CAM, TY_INT_B_GAIN, 2));

自动曝光ROI

TY_STRUCT_AEC_ROI

设置图像传感器的 AEC/AGC 配置的统计范围，图像传感器将依据该范围内的图像数据特征自动调整曝光时间和增益，实现更好的图像效果。

下面代码将图像左上角 100*100 的区域设置为 ROI 区域，AEC 仅统计该区域：

TY_AEC_ROI_PARAM aec_roi_param;
aec_roi_param.x = 0;
aec_roi_param.y = 0;
aec_roi_param.w = 100;
aec_roi_param.h = 100;
TYSetStruct(hDevice, TY_COMPONENT_RGB_CAM, TY_STRUCT_AEC_ROI, &aec_roi_param, sizeof(TY_AEC_ROI_PARAM));

图像集成时间

TY_INT_CAPTURE_TIME_US

部分相机图像采集时间较长（超过图像传感器的曝光时间），如 -IX 系列及 PS 系列产品，可以通过 API 读取实际的集成时间，单位为微秒。

读取 Capture Time 功能示例：

int32_t capture_time;
TYGetInt(hDevice, TY_COMPONENT_DEVICE, TY_INT_CAPTURE_TIME_US, &capture_time);
printf("get capture time %d\n", capture_time);

图像同步

TY_BOOL_CMOS_SYNC = 0x0205 | TY_FEATURE_BOOL,

双目深度计算使用的左、右两幅图像曝光完全同步时，可以获得最好的深度图数据；当左、右两幅红外图像曝光不完全同步，时间相差较小时，也可以输出深度图像数据，数据精度稍差。左右图像完全同步时，图像输出帧率低于不完全同步时图像输出帧率。依据实际使用场景对深度图质量和帧率的需要，可以通过该布尔型属性对相机的工作配置进行修改。深度相机默认采用完全同步的设置。

bool tmp;
ASSERT_OK(TYSetBool(hDevice, TY_COMPONENT_DEVICE, TY_BOOL_CMOS_SYNC, false));
ASSERT_OK(TYGetBool(hDevice, TY_COMPONENT_DEVICE, TY_BOOL_CMOS_SYNC, &tmp));
if (tmp != false) {
   LOGD("==set TY_BOOL_CMOS_SYNC failed !");
}

数据流同步

TY_ENUM_STREAM_ASYNC

深度相机的红外图像、彩色图像和深度图像数据输出时，支持立即输出已获取到的图像数据。如 -IX 系列及 PS 系列产品，红外和彩色图像获取时间较早，深度数据计算时间较长，可以先输出红外和彩色数据，供上位机进行必要的计算。

typedef enum TY_STREAM_ASYNC_MODE_LIST
{
    TY_STREAM_ASYNC_OFF         = 0,
    TY_STREAM_ASYNC_DEPTH       = 1,
    TY_STREAM_ASYNC_RGB         = 2,
    TY_STREAM_ASYNC_DEPTH_RGB   = 3,
    TY_STREAM_ASYNC_ALL         = 0xff,
}TY_STREAM_ASYNC_MODE_LIST;

ASSERT_OK(TYSetEnum(hDevice, TY_COMPONENT_DEVICE, TY_ENUM_STREAM_ASYNC, TY_STREAM_ASYNC_ALL));

图像格式设置与处理

图像的格式和分辨率是 ENUM 类型。SDK 头文件中枚举了相机支持的各种图像格式和分辨率。不同相机支持的具体格式不同，可以通过 API 进行查询和设置。

TY_ENUM_IMAGE_MODE = 0x0109 | TY_FEATURE_ENUM,

示例：获取彩色图像支持的图像格式。

uint32_t n;
ASSERT_OK(TYGetEnumEntryCount(hDevice, TY_COMPONENT_RGB_CAM, TY_ENUM_IMAGE_MODE, &n));
LOGD("===         %14s: entry count %d", "", n);
if (n > 0) {
    std::vector<TY_ENUM_ENTRY> entry(n);
    ASSERT_OK(TYGetEnumEntryInfo(hDevice, TY_COMPONENT_RGB_CAM, TY_ENUM_IMAGE_MODE, &entry[0], n, &n));
    for (uint32_t i = 0; i < n; i++) {
        LOGD("===         %14s:     value(%d), desc(%s)", "", entry[i].value, entry[i].description);
    }
}

示例：设置彩色图格式为 BAYER8GB，分辨率为 1280*960。

LOGD("=== Configure feature, set resolution to 1280x960.");
ASSERT_OK(TYSetEnum(hDevice, TY_COMPONENT_RGB_CAM, TY_ENUM_IMAGE_MODE, TY_PIXEL_FORMAT_BAYER8GB|TY_RESOLUTION_MODE_1280x960));

或者使用图像格式的组合定义 TY_IMAGE_MODE_pixel_resolution 来配置彩色图像传感器的输出图像格式：

LOGD("=== Configure feature, set resolution to 1280x960.");
ASSERT_OK(TYSetEnum(hDevice, TY_COMPONENT_RGB_CAM, TY_ENUM_IMAGE_MODE, TY_IMAGE_MODE_BAYER8GB_1280x960));

示例：设置深度图为 640x480 格式。

std::vector<TY_ENUM_ENTRY> image_mode_list;
uint32_t n = 0;
ASSERT_OK(TYGetEnumEntryCount(hDevice, TY_COMPONENT_DEPTH_CAM, TY_ENUM_IMAGE_MODE, &n));
LOGD("===         %14s: entry count %d", "", n);
if (n == 0){
    return TY_STATUS_ERROR;
}
std::vector<TY_ENUM_ENTRY> entry(n);
ASSERT_OK(TYGetEnumEntryInfo(hDevice, TY_COMPONENT_DEPTH_CAM, TY_ENUM_IMAGE_MODE, &entry[0], n, &n));
for (int idx = 0; idx < image_mode_list.size(); idx++)
{
    TY_ENUM_ENTRY &entry = image_mode_list[idx];
    //try to select a VGA resolution
    if (TYImageWidth(entry.value) == 640 || TYImageHeight(entry.value) == 640)
    {
        LOGD("Select Depth map Mode: %s", entry.description);
        int err = TYSetEnum(hDevice, TY_COMPONENT_DEPTH_CAM, TY_ENUM_IMAGE_MODE, entry.value);
        ASSERT(err == TY_STATUS_OK || err == TY_STATUS_NOT_PERMITTED);
        break;
    }
}

TY_FLOAT_SCALE_UNIT = 0x010a | TY_FEATURE_FLOAT,

深度测量值的计算系数。该值默认为 1.0，深度图中每个 Pixel 的数据值是实际测得的距离(单位是毫米)；当该值不为 1.0 时，深度图中每个 Pixel 的数据值与该系数的乘积可得到实际测得的距离(单位是毫米)。
```
float value;
ASSERT_OK(TYGetFloat(hDevice, TY_COMPONENT_DEPTH_CAM, TY_FLOAT_SCALE_UNIT, &value));
```

TY_BOOL_UNDISTORTION = 0x0510 | TY_FEATURE_BOOL, ///< Output undistorted image

畸变矫正开关。默认为 false，即红外图像传感器组件默认输出未做畸变矫正的图像数据。

bool hasUndistortSwitch;
ASSERT_OK( TYHasFeature(hDevice, TY_COMPONENT_IR_CAM_LEFT, TY_BOOL_UNDISTORTION, &hasUndistortSwitch) );
if (hasUndistortSwitch) {
    ASSERT_OK( TYSetBool(hDevice, TY_COMPONENT_IR_CAM_LEFT, TY_BOOL_UNDISTORTION, true) );
}

TY_BOOL_BRIGHTNESS_HISTOGRAM = 0x0511 | TY_FEATURE_BOOL,

红外亮度直方图组件使能开关。默认为 false，即不打开红外亮度直方图组件。使能红外亮度直方图组件（TY_COMPONENT_BRIGHT_HISTO），设备会统计并输出左、右红外图像的亮度直方图。

示例，详情请参考 SDK 示例程序 SimpleView_FetchHisto：

int32_t allComps, componentIDs = 0;
ASSERT_OK( TYGetComponentIDs(hDevice, &allComps) );
if(allComps & TY_COMPONENT_BRIGHT_HISTO) {
    LOGD("=== Has bright histo component");
    componentIDs |= TY_COMPONENT_BRIGHT_HISTO;
}

LOGD("=== Configure components, open ir cam");
componentIDs |= TY_COMPONENT_IR_CAM_RIGHT| TY_COMPONENT_IR_CAM_LEFT;
ASSERT_OK( TYEnableComponents(hDevice, componentIDs) );

TY_BOOL_DEPTH_POSTPROC = 0x0512 | TY_FEATURE_BOOL,

深度图像后处理开关。部分深度相机支持深度图的平滑滤波功能。

激光器设置

TY_BOOL_LASER_AUTO_CTRL = 0x0501 | TY_FEATURE_BOOL,

激光器自动调整功能开关，布尔型属性，默认为true，即深度相机依据深度计算需要，自动开关红外激光器。具体规则如下：
- TY_BOOL_LASER_AUTO_CTRL= true
  - 有深度图输出，激光器便开启，激光亮度通过TY_INT_LASER_POWER设置；
  - 无深度图输出，激光器便关闭。
- TY_BOOL_LASER_AUTO_CTRL= false
  - 有任何图像输出，激光器都开启，激光亮度通过TY_INT_LASER_POWER设置。
TY_INT_LASER_POWER = 0x0500 | TY_FEATURE_INT,

激光强度设置。整型属性，设置范围 0~100，默认为 100。通过该属性可设置激光强度，从而调节红外图像传感器成像的亮度。该属性设置为 0 时，激光器关闭。

示例：关闭激光发射器自动调整功能并将激光强度设置为 90。
```
ASSERT_OK(TYSetBool(hDevice, TY_COMPONENT_LASER, TY_BOOL_LASER_AUTO_CTRL, false));
ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_LASER, TY_INT_LASER_POWER, 90));
```

泛光设置

TY_BOOL_FLASHLIGHT = 0x0213 | TY_FEATURE_BOOL,

泛光功能开关，布尔型属性，默认为 false。通过该属性可开启泛光功能，利用红外泛光进行相机标定。目前只有 PS801 系列支持泛光功能。具体规则如下：
- TY_BOOL_FLASHLIGHT= true
  - 有深度图输出，泛光灯便关闭；
  - 无深度图输出，泛光灯便开启，泛光亮度通过 TY_INT_FLASHLIGHT_INTENSITY 设置。
- TY_BOOL_FLASHLIGHT= false
  - 泛光灯关闭。
TY_INT_FLASHLIGHT_INTENSITY = 0x0214 | TY_FEATURE_INT,

泛光强度设置。整型属性，设置范围 0~63，默认为 19。开启泛光功能后，依据实际标定场景，通过该属性设置泛光强度。

Note

泛光灯自带过热保护功能，当温度过高时，泛光灯自动熄灭。

示例：开启泛光功能并将泛光强度设置为 63。

ASSERT_OK(TYSetBool(hDevice, TY_COMPONENT_DEVICE, TY_BOOL_FLASHLIGHT, true));
ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_DEVICE, TY_INT_FLASHLIGHT_INTENSITY, 63));

ToF 相机属性

图像质量设置

TY_ENUM_DEPTH_QUALITY = 0x0900 | TY_FEATURE_ENUM,

设置 ToF 深度相机输出的深度图质量。枚举型属性，定义如下：

typedef enum TY_DEPTH_QUALITY_LIST
{
TY_DEPTH_QUALITY_BASIC = 1,
TY_DEPTH_QUALITY_MEDIUM = 2,
TY_DEPTH_QUALITY_HIGH = 4,
}TY_DEPTH_QUALITY_LIST;

深度图质量设置为 BASIC 时，深度值抖动幅度大，输出帧率高。
深度图质量设置为 MEDIUM 时，深度值抖动幅度中等，输出帧率中等。
深度图质量设置为 HIGH 时，深度值抖动幅度小，输出帧率低。

飞点滤波设置

TY_INT_FILTER_THRESHOLD = 0x0901 | TY_FEATURE_INT, ///< the threshold of the noise filter, 0 for disabled

ToF 深度相机飞点滤波阈值。整型属性，范围 [0,100]。默认值为 0，即不加滤波。滤波阈值设置越小，过滤的飞点越多。

Note

滤波阈值设置过小，可能会把大量有效深度信息过滤掉。

示例：将 ToF 深度相机飞点滤波阈值设置为 43。

ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_DEPTH_CAM, TY_INT_FILTER_THRESHOLD, 43));

调制频道设置

TY_INT_TOF_CHANNEL = 0x0902 | TY_FEATURE_INT, ///< the frequency channel of tof

ToF 深度相机调制频道。整型属性。不同调制频道的调制频率不同，互不干扰。如需在同一场景运行多台 ToF 深度相机，首先需确保同系列相机的调制频道不同。

示例：将 ToF 深度相机调制频道设置为 2。

ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_DEPTH_CAM, TY_INT_TOF_CHANNEL, 2));

激光调制光强设置

TY_INT_TOF_MODULATION_THRESHOLD = 0x0903 | TY_FEATURE_INT, ///< the threshold of the tof modulation

ToF 深度相机接收激光调制光强的阈值，整型属性。小于此阈值的像素点不参与计算深度，即像素点的深度值赋值为 0。

示例：将 ToF 深度相机接收激光调制光强的阈值设置为 300。

ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_DEPTH_CAM, TY_INT_TOF_MODULATION_THRESHOLD, 300));

抖动过滤设置

TY_INT_TOF_JITTER_THRESHOLD = 0x0307 | TY_FEATURE_INT, ///< tof jitter threshold for depth

ToF 深度相机抖动过滤阈值。整型属性。阈值设置值越大，深度图边缘抖动的深度数据过滤得越少。

示例：将 ToF 深度相机抖动过滤阈值设置为 5。

ASSERT_OK(TYSetInt(hDevice, TY_COMPONENT_DEPTH_CAM, TY_INT_TOF_JITTER_THRESHOLD, 5));

坐标变换

点云数据结构：

typedef struct TY_VECT_3F
{
    float   x;
    float   y;
    float   z;
}TY_VECT_3F;

深度图上点的数据结构：

typedef struct TY_PIXEL_DESC
{
  int16_t x;      // x coordinate in pixels
  int16_t y;      // y coordinate in pixels
  uint16_t depth; // depth value
  uint16_t rsvd;
}TY_PIXEL_DESC;

TYInvertExtrinsic 逆阵转换，输入 4x4 外参矩阵，输出其逆矩阵。

TY_CAPI   TYInvertExtrinsic      (const TY_CAMERA_EXTRINSIC* orgExtrinsic,
                                 TY_CAMERA_EXTRINSIC* invExtrinsic);

TYMapDepthToPoint3d 指定深度图上点转换为点云数据，输入深度相机标定数据、深度图宽高和深度数据点、点数量，输出点云数据。

TY_CAPI   TYMapDepthToPoint3d    (const TY_CAMERA_CALIB_INFO* src_calib,
                                 uint32_t depthW, uint32_t depthH,
                                 const TY_PIXEL_DESC* depthPixels, uint32_t count,
                                 TY_VECT_3F* point3d);

TYMapPoint3dToDepth 转换点云数据为深度图数据，输入深度相机标定数据，点云数据、点数和目标深度图的宽高，输出深度图上点数据。 TYMapDepthToPoint3d 的逆操作。

TY_CAPI   TYMapPoint3dToDepth    (const TY_CAMERA_CALIB_INFO* dst_calib,
                                 const TY_VECT_3F* point3d, uint32_t count,
                                 uint32_t depthW, uint32_t depthH,
                                 TY_PIXEL_DESC* depth);

TYMapDepthImageToPoint3d 转换深度数据图为点云，输入深度相机的标定数据，深度图宽、高、和深度图，输出点云。数值为 0 的无效深度点映射为 (NAN, NAN, NAN)。

TY_CAPI   TYMapDepthImageToPoint3d  (const TY_CAMERA_CALIB_INFO* src_calib,
                                     int32_t imageW, int32_t imageH,
                                     const uint16_t* depth,
                                     TY_VECT_3F* point3d,
                                     float f_scale_unit = 1.0f);

示例：获取点云数据，详请请参考 SDK 示例程序 SimpleView_Point3D。

struct CallbackData {
    int             index;
    TY_DEV_HANDLE   hDevice;
    TY_ISP_HANDLE   isp_handle;
    TY_CAMERA_CALIB_INFO depth_calib;
    TY_CAMERA_CALIB_INFO color_calib;

};

static void handleFrame(TY_FRAME_DATA* frame, void* userdata) {
    //we only using Opencv Mat as data container.
    //you can allocate memory by yourself.
    CallbackData* pData = (CallbackData*) userdata;
    LOGD("=== Get frame %d", ++pData->index);

    cv::Mat depth, color;
    parseFrame(*frame, &depth, NULL, NULL, &color, isp_handle);
    if(!depth.empty()){
        std::vector<TY_VECT_3F> p3d;
        p3d.resize(depth.size().area());

        ASSERT_OK(TYMapDepthImageToPoint3d(&pData->depth_calib, depth.cols, depth.rows
            , (uint16_t*)depth.data, &p3d[0]));
}

TYMapPoint3dToDepthImage 转换点云为深度图，输入深度相机的标定数据，点云和点数、深度图宽、高，输出转化后的深度图。无效点云 (NAN, NAN, NAN) 映射为无效深度0。

TY_CAPI   TYMapPoint3dToDepthImage  (const TY_CAMERA_CALIB_INFO* dst_calib,
                                 const TY_VECT_3F* point3d, uint32_t count,
                                 uint32_t depthW, uint32_t depthH, uint16_t* depth);

TYMapPoint3dToPoint3d 点云坐标转换。输入外参矩阵、点云数据和点数，输出转换后的点云数据。

TY_CAPI   TYMapPoint3dToPoint3d     (const TY_CAMERA_EXTRINSIC* extrinsic,
                                 const TY_VECT_3F* point3d, int32_t count,
                                 TY_VECT_3F* point3dTo);

TYMapDepthToColorCoordinate 映射深度数据点到彩色图像坐标。输入深度图标定数据、深度图宽和高、深度数据点、深度图点数、彩色图标定数据、彩色图宽、高，输出映射后的深度点。

static inline TY_STATUS TYMapDepthToColorCoordinate(
              const TY_CAMERA_CALIB_INFO* depth_calib,
              uint32_t depthW, uint32_t depthH,
              const TY_PIXEL_DESC* depth, uint32_t count,
              const TY_CAMERA_CALIB_INFO* color_calib,
              uint32_t mappedW, uint32_t mappedH,
              TY_PIXEL_DESC* mappedDepth,
                  float f_scale_unit = 1.0f);

TYCreateDepthToColorCoordinateLookupTable 创建深度图到彩色图的坐标查找表。输入深度图标定数据、深度图宽和高、深度图、彩色图标定数据、映射后的深度图宽和高，输出映射后的深度点数据表。

static inline TY_STATUS TYCreateDepthToColorCoordinateLookupTable(
              const TY_CAMERA_CALIB_INFO* depth_calib,
              uint32_t depthW, uint32_t depthH, const uint16_t* depth,
              const TY_CAMERA_CALIB_INFO* color_calib,
              uint32_t mappedW, uint32_t mappedH,
              TY_PIXEL_DESC* lut,
                  float f_scale_unit = 1.0f);

TYMapDepthImageToColorCoordinate 映射深度图到彩色图坐标。输入深度图标定数据、深度图宽和高，深度图、彩色图标定数据、彩色图宽和高，输出映射后的深度图。

static inline TY_STATUS TYMapDepthImageToColorCoordinate(
              const TY_CAMERA_CALIB_INFO* depth_calib,
              uint32_t depthW, uint32_t depthH, const uint16_t* depth,
              const TY_CAMERA_CALIB_INFO* color_calib,
              uint32_t mappedW, uint32_t mappedH, uint16_t* mappedDepth,
                  float f_scale_unit = 1.0f);

TYMapRGBImageToDepthCoordinate 映射彩色图到深度图坐标。输入深度图标定数据、深度图宽和高、深度图、彩色图标定数据、彩色图宽和高、彩色图，输出映射后的彩色图像数据。

static inline TY_STATUS TYMapRGBImageToDepthCoordinate(
              const TY_CAMERA_CALIB_INFO* depth_calib,
              uint32_t depthW, uint32_t depthH, const uint16_t* depth,
              const TY_CAMERA_CALIB_INFO* color_calib,
              uint32_t rgbW, uint32_t rgbH, const uint8_t* inRgb,
              uint8_t* mappedRgb,
                  float f_scale_unit = 1.0f);

示例：深度图和彩色图之间的坐标映射，详请请参考 SDK 示例程序 SimpleView_Registration。

static void doRegister(const TY_CAMERA_CALIB_INFO& depth_calib
                      , const TY_CAMERA_CALIB_INFO& color_calib
                      , const cv::Mat& depth
                      , const float f_scale_unit
                      , const cv::Mat& color
                      , bool needUndistort
                      , cv::Mat& undistort_color
                      , cv::Mat& out
                      , bool map_depth_to_color
                      )
{
  // do undistortion
  if (needUndistort) {
    TY_IMAGE_DATA src;
    src.width = color.cols;
    src.height = color.rows;
    src.size = color.size().area() * 3;
    src.pixelFormat = TY_PIXEL_FORMAT_RGB;
    src.buffer = color.data;

    undistort_color = cv::Mat(color.size(), CV_8UC3);
    TY_IMAGE_DATA dst;
    dst.width = color.cols;
    dst.height = color.rows;
    dst.size = undistort_color.size().area() * 3;
    dst.buffer = undistort_color.data;
    dst.pixelFormat = TY_PIXEL_FORMAT_RGB;
    ASSERT_OK(TYUndistortImage(&color_calib, &src, NULL, &dst));
  }
  else {
    undistort_color = color;
  }

  // do register
  if (map_depth_to_color) {
    out = cv::Mat::zeros(undistort_color.size(), CV_16U);
    ASSERT_OK(
      TYMapDepthImageToColorCoordinate(
        &depth_calib,
        depth.cols, depth.rows, depth.ptr<uint16_t>(),
        &color_calib,
        out.cols, out.rows, out.ptr<uint16_t>(), f_scale_unit
      )
    );
    cv::Mat temp;
    //you may want to use median filter to fill holes in projected depth map
    //or do something else here
    cv::medianBlur(out, temp, 5);
    out = temp;
  }
  else {
    out = cv::Mat::zeros(depth.size(), CV_8UC3);
    ASSERT_OK(
      TYMapRGBImageToDepthCoordinate(
        &depth_calib,
        depth.cols, depth.rows, depth.ptr<uint16_t>(),
        &color_calib,
        undistort_color.cols, undistort_color.rows, undistort_color.ptr<uint8_t>(),
        out.ptr<uint8_t>(), f_scale_unit
      )
    );
  }
}

TYMapMono8ImageToDepthCoordinate 映射 MONO8 彩色图到深度图坐标。输入深度图标定数据、深度图宽和高、深度图、MONO8 彩色图标定数据、MONO8 彩色图宽和高、MONO8 彩色图，输出映射后的 MONO8 彩色图像数据。

static inline TY_STATUS TYMapMono8ImageToDepthCoordinate(
              const TY_CAMERA_CALIB_INFO* depth_calib,
              uint32_t depthW, uint32_t depthH, const uint16_t* depth,
              const TY_CAMERA_CALIB_INFO* color_calib,
              uint32_t monoW, uint32_t monoH, const uint8_t* inMono,
              uint8_t* mappedMono,
                  float f_scale_unit = 1.0f);

图像处理

TYUndistortImage 畸变校正，可对传感器组件输出的图像做畸变处理，支持的数据格式包括：TY_PIXEL_FORMAT_MONO、TY_PIXEL_FORMAT_RGB、TY_PIXEL_FORMAT_BGR。输入参数为传感器标定数据、未矫正原始图像和期望的图像内参（输入为 NULL 则使用传感器原有内参），输出校正后的图像数据。

TY_CAPI TYUndistortImage (const TY_CAMERA_CALIB_INFO *srcCalibInfo
    , const TY_IMAGE_DATA *srcImage
    , const TY_CAMERA_INTRINSIC *cameraNewIntrinsic
    , TY_IMAGE_DATA *dstImage
    );

TYDepthSpeckleFilter 深度图中无效点填充和离散点降噪处理，输入深度图和滤波参数，输出处理后的深度图。

struct DepthSpeckleFilterParameters {
    int max_speckle_size; // blob size smaller than this will be removed
    int max_speckle_diff; // Maximum difference between neighbor disparity pixels
};
#define DepthSpeckleFilterParameters_Initializer {150, 64}

TY_CAPI TYDepthSpeckleFilter (TY_IMAGE_DATA* depthImage
        , const DepthSpeckleFilterParameters* param
        );

TYDepthEnhenceFilter 图像滤波，输入深度图，图像数量，参照图和滤波系数，输出滤波后的深度数据。

TY_CAPI TYDepthEnhenceFilter (const TY_IMAGE_DATA* depthImages
        , int imageNum
        , TY_IMAGE_DATA *guide
        , TY_IMAGE_DATA *output
        , const DepthEnhenceParameters* param
        );


struct DepthEnhenceParameters{
    float sigma_s;          // filter param on space
    float sigma_r;          // filter param on range
    int   outlier_win_sz;   // outlier filter windows size
    float outlier_rate;
};
#define DepthEnhenceParameters_Initializer {10, 20, 10, 0.1f}

sigma_s 是空间滤波系数，sigma_r 是深度滤波系数，outlier_win_sz 是以像素为单位的滤波窗口，outlier_rate 噪音过滤系数。

API 参考

The camport3 libraries provide support for configuring PERCIPIO depth camera, data receiving and post-processing functionality.

API for Percipio depth camera

TYApi.h

includes camera control and data receiving interface, which supports configuration for image resolution, frame rate, exposure

time, gain, working mode,etc.

Defines

_STDBOOL_H

__bool_true_false_are_defined

bool

true

false

TY_DLLIMPORT

TY_DLLEXPORT

TY_STDC

TY_CDEC

TY_EXPORT

TY_EXTC

TY_DECLARE_IMAGE_MODE0(pix, res)

TY_DECLARE_IMAGE_MODE1(pix)

TY_CAPI

Typedefs

typedef enum TY_STATUS_LIST TY_STATUS_LIST: API call return status.

typedef int32_t TY_STATUS

typedef enum TY_FW_ERRORCODE_LIST TY_FW_ERRORCODE_LIST

typedef uint32_t TY_FW_ERRORCODE

typedef enum TY_EVENT_LIST TY_ENENT_LIST

typedef int32_t TY_EVENT

typedef void *TY_INTERFACE_HANDLE: Interface handle.

typedef void *TY_DEV_HANDLE: Device Handle.

typedef enum TY_DEVICE_COMPONENT_LIST TY_DEVICE_COMPONENT_LIST

@breif Device Component list A device contains several component.

Each component can be controlled by its own features, such as image width, exposure time, etc..

See also

To Know how to get feature information please refer to sample code DumpAllFeatures

typedef uint32_t TY_COMPONENT_ID

component unique id

See also

TY_DEVICE_COMPONENT_LIST

typedef enum TY_FEATURE_TYPE_LIST TY_FEATURE_TYPE_LIST: Feature Format Type definitions.

typedef uint32_t TY_FEATURE_TYPE

typedef enum TY_FEATURE_ID_LIST TY_FEATURE_ID_LIST: feature for component definitions

typedef uint32_t TY_FEATURE_ID

feature unique id

See also

TY_FEATURE_ID_LIST

typedef enum TY_DEPTH_QUALITY_LIST TY_DEPTH_QUALITY_LIST

typedef uint32_t TY_DEPTH_QUALITY

typedef enum TY_TRIGGER_POL_LIST TY_TRIGGER_POL_LIST: set external trigger signal edge

typedef uint32_t TY_TRIGGER_POL

typedef enum TY_INTERFACE_TYPE_LIST TY_INTERFACE_TYPE_LIST

Interface type definition.

See also

TYGetInterfaceList

typedef uint32_t TY_INTERFACE_TYPE

typedef enum TY_ACCESS_MODE_LIST TY_ACCESS_MODE_LIST

Indicate a feature is readable or writable.

See also

TYGetFeatureInfo

typedef uint8_t TY_ACCESS_MODE

typedef enum TY_STREAM_ASYNC_MODE_LIST TY_STREAM_ASYNC_MODE_LIST: stream async mode

typedef uint8_t TY_STREAM_ASYNC_MODE

typedef enum TY_PIXEL_BITS_LIST TY_PIXEL_BITS_LIST

Pixel size type definitions to define the pixel size in bits.

See also

TY_PIXEL_FORMAT_LIST

typedef uint32_t TY_PIXEL_BITS

typedef enum TY_PIXEL_FORMAT_LIST TY_PIXEL_FORMAT_LIST: pixel format definitions

typedef uint32_t TY_PIXEL_FORMAT

typedef enum TY_RESOLUTION_MODE_LIST TY_RESOLUTION_MODE_LIST: predefined resolution list

typedef int32_t TY_RESOLUTION_MODE

typedef enum TY_IMAGE_MODE_LIST TY_IMAGE_MODE_LIST: Predefined Image Mode List image mode controls image resolution & format predefined image modes named like TY_IMAGE_MODE_MONO_160x120,TY_IMAGE_MODE_RGB_1280x960.

typedef uint32_t TY_IMAGE_MODE

typedef enum TY_TRIGGER_MODE_LIST TY_TRIGGER_MODE_LIST

See also

refer to sample SimpleView_TriggerMode for detail usage

typedef int16_t TY_TRIGGER_MODE

typedef enum TY_TIME_SYNC_TYPE_LIST TY_TIME_SYNC_TYPE_LIST: type of time sync

typedef uint32_t TY_TIME_SYNC_TYPE

typedef uint32_t TY_E_VOLT_T

typedef uint32_t TY_E_DO_MODE

typedef uint32_t TY_E_DI_MODE

typedef uint32_t TY_E_DI_INT_ACTION

typedef struct TY_VERSION_INFO TY_VERSION_INFO

typedef struct TY_DEVICE_NET_INFO TY_DEVICE_NET_INFO: device network information

typedef struct TY_DEVICE_USB_INFO TY_DEVICE_USB_INFO

typedef struct TY_INTERFACE_INFO TY_INTERFACE_INFO

See also

TYGetInterfaceList

typedef struct TY_DEVICE_BASE_INFO TY_DEVICE_BASE_INFO

See also

TYGetDeviceList

typedef struct TY_FEATURE_INFO TY_FEATURE_INFO

typedef struct TY_INT_RANGE TY_INT_RANGE

typedef struct TY_FLOAT_RANGE TY_FLOAT_RANGE

float range data structure

See also

TYGetFloatRange

typedef struct TY_BYTEARRAY_ATTR TY_BYTEARRAY_ATTR

byte array data structure

See also

TYGetByteArray

typedef struct TY_ENUM_ENTRY TY_ENUM_ENTRY

enum feature entry information

See also

TYGetEnumEntryInfo

typedef struct TY_VECT_3F TY_VECT_3F

typedef struct TY_CAMERA_INTRINSIC TY_CAMERA_INTRINSIC

a 3x3 matrix

.	.	.
fx	0	cx
0	fy	cy
0	0	1

See also

TYGetStruct Usage:

TY_CAMERA_INTRINSIC intrinsic;
TYGetStruct(hDevice, some_compoent, TY_STRUCT_CAM_INTRINSIC, &intrinsic, sizeof(intrinsic));

typedef struct TY_CAMERA_EXTRINSIC TY_CAMERA_EXTRINSIC

a 4x4 matrix

.	.	.	.
r11	r12	r13	t1
r21	r22	r23	t2
r31	r32	r33	t3
0	0	0	1

See also

TYGetStruct Usage:

TY_CAMERA_EXTRINSIC extrinsic;
TYGetStruct(hDevice, some_compoent, TY_STRUCT_EXTRINSIC, &extrinsic, sizeof(extrinsic));

typedef struct TY_CAMERA_DISTORTION TY_CAMERA_DISTORTION

camera distortion parameters

See also

TYGetStruct Usage:

TY_CAMERA_DISTORTION distortion;
TYGetStruct(hDevice, some_compoent, TY_STRUCT_CAM_DISTORTION, &distortion, sizeof(distortion));

typedef struct TY_CAMERA_CALIB_INFO TY_CAMERA_CALIB_INFO

camera ‘s cailbration data

See also

TYGetStruct

typedef struct TY_TRIGGER_PARAM TY_TRIGGER_PARAM

typedef struct TY_TRIGGER_PARAM_EX TY_TRIGGER_PARAM_EX

typedef struct TY_TRIGGER_TIMER_LIST TY_TRIGGER_TIMER_LIST

typedef struct TY_TRIGGER_TIMER_PERIOD TY_TRIGGER_TIMER_PERIOD

typedef struct TY_AEC_ROI_PARAM TY_AEC_ROI_PARAM

typedef struct TY_CAMERA_STATISTICS TY_CAMERA_STATISTICS

typedef struct TY_IMU_DATA TY_IMU_DATA

typedef struct TY_ACC_BIAS TY_ACC_BIAS

a 3x3 matrix

.	.	.
BIASx	BIASy	BIASz

typedef struct TY_ACC_MISALIGNMENT TY_ACC_MISALIGNMENT

a 3x3 matrix

|.

|.|.|

.	.	.
1	-GAMAyz	GAMAzy
GAMAxz	1	-GAMAzx
-GAMAxy	GAMAyx	1

typedef struct TY_ACC_SCALE TY_ACC_SCALE

a 3x3 matrix

.	.	.
SCALEx	0	0
0	SCALEy	0
0	0	SCALEz

typedef struct TY_GYRO_BIAS TY_GYRO_BIAS

a 3x3 matrix

.	.	.
BIASx	BIASy	BIASz

typedef struct TY_GYRO_MISALIGNMENT TY_GYRO_MISALIGNMENT

a 3x3 matrix

.	.	.
1	-ALPHAyz	ALPHAzy
0	1	-ALPHAzx
0	0	1

typedef struct TY_GYRO_SCALE TY_GYRO_SCALE

a 3x3 matrix

.	.	.
SCALEx	0	0
0	SCALEy	0
0	0	SCALEz

typedef struct TY_CAMERA_TO_IMU TY_CAMERA_TO_IMU

a 4x4 matrix

.	.	.	.
r11	r12	r13	t1
r21	r22	r23	t2
r31	r32	r33	t3
0	0	0	1

typedef struct TY_TOF_FREQ TY_TOF_FREQ

typedef enum TY_IMU_FPS_LIST TY_IMU_FPS_LIST

typedef struct TY_IMAGE_DATA TY_IMAGE_DATA

typedef struct TY_FRAME_DATA TY_FRAME_DATA

typedef struct TY_EVENT_INFO TY_EVENT_INFO

typedef struct TY_DO_WORKMODE TY_DO_WORKMODE

typedef struct TY_DI_WORKMODE TY_DI_WORKMODE

typedef void (*TY_EVENT_CALLBACK)(TY_EVENT_INFO*, void *userdata)

typedef void (*TY_IMU_CALLBACK)(TY_IMU_DATA*, void *userdata)

Enums

enum TY_STATUS_LIST

API call return status.

Values:

enumerator TY_STATUS_OK

enumerator TY_STATUS_ERROR

enumerator TY_STATUS_NOT_INITED

enumerator TY_STATUS_NOT_IMPLEMENTED

enumerator TY_STATUS_NOT_PERMITTED

enumerator TY_STATUS_DEVICE_ERROR

enumerator TY_STATUS_INVALID_PARAMETER

enumerator TY_STATUS_INVALID_HANDLE

enumerator TY_STATUS_INVALID_COMPONENT

enumerator TY_STATUS_INVALID_FEATURE

enumerator TY_STATUS_WRONG_TYPE

enumerator TY_STATUS_WRONG_SIZE

enumerator TY_STATUS_OUT_OF_MEMORY

enumerator TY_STATUS_OUT_OF_RANGE

enumerator TY_STATUS_TIMEOUT

enumerator TY_STATUS_WRONG_MODE

enumerator TY_STATUS_BUSY

enumerator TY_STATUS_IDLE

enumerator TY_STATUS_NO_DATA

enumerator TY_STATUS_NO_BUFFER

enumerator TY_STATUS_NULL_POINTER

enumerator TY_STATUS_READONLY_FEATURE

enumerator TY_STATUS_INVALID_DESCRIPTOR

enumerator TY_STATUS_INVALID_INTERFACE

enumerator TY_STATUS_FIRMWARE_ERROR

enumerator TY_STATUS_DEV_EPERM

enumerator TY_STATUS_DEV_EIO

enumerator TY_STATUS_DEV_ENOMEM

enumerator TY_STATUS_DEV_EBUSY

enumerator TY_STATUS_DEV_EINVAL

enum TY_FW_ERRORCODE_LIST

Values:

enumerator TY_FW_ERRORCODE_CAM0_NOT_DETECTED

enumerator TY_FW_ERRORCODE_CAM1_NOT_DETECTED

enumerator TY_FW_ERRORCODE_CAM2_NOT_DETECTED

enumerator TY_FW_ERRORCODE_POE_NOT_INIT

enumerator TY_FW_ERRORCODE_RECMAP_NOT_CORRECT

enumerator TY_FW_ERRORCODE_LOOKUPTABLE_NOT_CORRECT

enumerator TY_FW_ERRORCODE_DRV8899_NOT_INIT

enumerator TY_FW_ERRORCODE_CONFIG_NOT_FOUND

enumerator TY_FW_ERRORCODE_CONFIG_NOT_CORRECT

enumerator TY_FW_ERRORCODE_XML_NOT_FOUND

enumerator TY_FW_ERRORCODE_XML_NOT_CORRECT

enumerator TY_FW_ERRORCODE_XML_OVERRIDE_FAILED

enumerator TY_FW_ERRORCODE_CAM_INIT_FAILED

enumerator TY_FW_ERRORCODE_LASER_INIT_FAILED

enum TY_EVENT_LIST

Values:

enumerator TY_EVENT_DEVICE_OFFLINE

enumerator TY_EVENT_LICENSE_ERROR

enumerator TY_EVENT_FW_INIT_ERROR

enum TY_DEVICE_COMPONENT_LIST

@breif Device Component list A device contains several component.

Each component can be controlled by its own features, such as image width, exposure time, etc..

See also

To Know how to get feature information please refer to sample code DumpAllFeatures

Values:

enumerator TY_COMPONENT_DEVICE: Abstract component stands for whole device, always enabled.

enumerator TY_COMPONENT_DEPTH_CAM: Depth camera.

enumerator TY_COMPONENT_IR_CAM_LEFT: Left IR camera.

enumerator TY_COMPONENT_IR_CAM_RIGHT: Right IR camera.

enumerator TY_COMPONENT_RGB_CAM_LEFT: Left RGB camera.

enumerator TY_COMPONENT_RGB_CAM_RIGHT: Right RGB camera.

enumerator TY_COMPONENT_LASER: Laser.

enumerator TY_COMPONENT_IMU: Inertial Measurement Unit.

enumerator TY_COMPONENT_BRIGHT_HISTO: virtual component for brightness histogram of ir

enumerator TY_COMPONENT_STORAGE: virtual component for device storage

enumerator TY_COMPONENT_RGB_CAM: Some device has only one RGB camera, map it to left.

enum TY_FEATURE_TYPE_LIST

Feature Format Type definitions.

Values:

enumerator TY_FEATURE_INT

enumerator TY_FEATURE_FLOAT

enumerator TY_FEATURE_ENUM

enumerator TY_FEATURE_BOOL

enumerator TY_FEATURE_STRING

enumerator TY_FEATURE_BYTEARRAY

enumerator TY_FEATURE_STRUCT

enum TY_FEATURE_ID_LIST

feature for component definitions

Values:

enumerator TY_STRUCT_CAM_INTRINSIC: see TY_CAMERA_INTRINSIC

enumerator TY_STRUCT_EXTRINSIC_TO_DEPTH: extrinsic between depth cam and current component , see TY_CAMERA_EXTRINSIC

enumerator TY_STRUCT_EXTRINSIC_TO_IR_LEFT: extrinsic between left IR and current compoent, see TY_CAMERA_EXTRINSIC

enumerator TY_STRUCT_CAM_DISTORTION: see TY_CAMERA_DISTORTION

enumerator TY_STRUCT_CAM_CALIB_DATA: see TY_CAMERA_CALIB_INFO

enumerator TY_STRUCT_CAM_RECTIFIED_INTRI: the rectified intrinsic. see TY_CAMERA_INTRINSIC

enumerator TY_BYTEARRAY_CUSTOM_BLOCK: used for reading/writing custom block

enumerator TY_BYTEARRAY_ISP_BLOCK: used for reading/writing fpn block

enumerator TY_INT_PERSISTENT_IP

enumerator TY_INT_PERSISTENT_SUBMASK

enumerator TY_INT_PERSISTENT_GATEWAY

enumerator TY_BOOL_GVSP_RESEND

enumerator TY_INT_PACKET_DELAY: microseconds

enumerator TY_INT_ACCEPTABLE_PERCENT

enumerator TY_INT_NTP_SERVER_IP: Ntp server IP.

enumerator TY_INT_PACKET_SIZE

enumerator TY_INT_LINK_CMD_TIMEOUT: milliseconds

enumerator TY_STRUCT_CAM_STATISTICS: statistical information, see TY_CAMERA_STATISTICS

enumerator TY_INT_WIDTH_MAX

enumerator TY_INT_HEIGHT_MAX

enumerator TY_INT_OFFSET_X

enumerator TY_INT_OFFSET_Y

enumerator TY_INT_WIDTH: Image width.

enumerator TY_INT_HEIGHT: Image height.

enumerator TY_ENUM_IMAGE_MODE: Resolution-PixelFromat mode, see TY_IMAGE_MODE_LIST.

enumerator TY_FLOAT_SCALE_UNIT: scale unit depth image is uint16 pixel format with default millimeter unit ,for some device can output Sub-millimeter accuracy data the acutal depth (mm)= PixelValue * ScaleUnit

enumerator TY_ENUM_TRIGGER_POL: Trigger POL, see TY_TRIGGER_POL_LIST.

enumerator TY_INT_FRAME_PER_TRIGGER: Number of frames captured per trigger.

enumerator TY_STRUCT_TRIGGER_PARAM: param of trigger, see TY_TRIGGER_PARAM

enumerator TY_STRUCT_TRIGGER_PARAM_EX: param of trigger, see TY_TRIGGER_PARAM_EX

enumerator TY_STRUCT_TRIGGER_TIMER_LIST: param of trigger mode 20, see TY_TRIGGER_TIMER_LIST

enumerator TY_STRUCT_TRIGGER_TIMER_PERIOD: param of trigger mode 21, see TY_TRIGGER_TIMER_PERIOD

enumerator TY_BOOL_KEEP_ALIVE_ONOFF: Keep Alive switch.

enumerator TY_INT_KEEP_ALIVE_TIMEOUT: Keep Alive timeout.

enumerator TY_BOOL_CMOS_SYNC: Cmos sync switch.

enumerator TY_INT_TRIGGER_DELAY_US: Trigger delay time, in microseconds.

enumerator TY_BOOL_TRIGGER_OUT_IO: Trigger out IO.

enumerator TY_INT_TRIGGER_DURATION_US: Trigger duration time, in microseconds.

enumerator TY_ENUM_STREAM_ASYNC: stream async switch, see TY_STREAM_ASYNC_MODE

enumerator TY_INT_CAPTURE_TIME_US: capture time in multi-ir

enumerator TY_ENUM_TIME_SYNC_TYPE: see TY_TIME_SYNC_TYPE

enumerator TY_BOOL_TIME_SYNC_READY: time sync done status

enumerator TY_BOOL_FLASHLIGHT: flashlight on/off control

enumerator TY_INT_FLASHLIGHT_INTENSITY: flashlight intensity level [0, 63]

enumerator TY_STRUCT_DO0_WORKMODE: DO_0 workmode, see TY_DO_WORKMODE.

enumerator TY_STRUCT_DI0_WORKMODE: DI_0 workmode, see TY_DI_WORKMODE.

enumerator TY_STRUCT_DO1_WORKMODE: DO_1 workmode, see TY_DO_WORKMODE.

enumerator TY_STRUCT_DI1_WORKMODE: DI_1 workmode, see TY_DI_WORKMODE.

enumerator TY_STRUCT_DO2_WORKMODE: DO_2 workmode, see TY_DO_WORKMODE.

enumerator TY_STRUCT_DI2_WORKMODE: DI_2 workmode, see TY_DI_WORKMODE.

enumerator TY_BOOL_AUTO_EXPOSURE: Auto exposure switch.

enumerator TY_INT_EXPOSURE_TIME: Exposure time in percentage.

enumerator TY_BOOL_AUTO_GAIN: Auto gain switch.

enumerator TY_INT_GAIN: Sensor Gain.

enumerator TY_BOOL_AUTO_AWB: Auto white balance.

enumerator TY_STRUCT_AEC_ROI: region of aec statistics, see TY_AEC_ROI_PARAM

enumerator TY_INT_TOF_HDR_RATIO: tof sensor hdr ratio for depth

enumerator TY_INT_TOF_JITTER_THRESHOLD: tof jitter threshold for depth

enumerator TY_INT_LASER_POWER: Laser power level.

enumerator TY_BOOL_LASER_AUTO_CTRL: Laser auto ctrl.

enumerator TY_BOOL_UNDISTORTION: Output undistorted image.

enumerator TY_BOOL_BRIGHTNESS_HISTOGRAM: Output bright histogram.

enumerator TY_BOOL_DEPTH_POSTPROC: Do depth image postproc.

enumerator TY_INT_R_GAIN: Gain of R channel.

enumerator TY_INT_G_GAIN: Gain of G channel.

enumerator TY_INT_B_GAIN: Gain of B channel.

enumerator TY_INT_ANALOG_GAIN: Analog gain.

enumerator TY_BOOL_HDR: HDR func enable/disable.

enumerator TY_BYTEARRAY_HDR_PARAMETER: HDR parameters.

enumerator TY_BOOL_IMU_DATA_ONOFF: IMU Data Onoff.

enumerator TY_STRUCT_IMU_ACC_BIAS: IMU acc bias matrix, see TY_ACC_BIAS.

enumerator TY_STRUCT_IMU_ACC_MISALIGNMENT: IMU acc misalignment matrix, see TY_ACC_MISALIGNMENT.

enumerator TY_STRUCT_IMU_ACC_SCALE: IMU acc scale matrix, see TY_ACC_SCALE.

enumerator TY_STRUCT_IMU_GYRO_BIAS: IMU gyro bias matrix, see TY_GYRO_BIAS.

enumerator TY_STRUCT_IMU_GYRO_MISALIGNMENT: IMU gyro misalignment matrix, see TY_GYRO_MISALIGNMENT.

enumerator TY_STRUCT_IMU_GYRO_SCALE: IMU gyro scale matrix, see TY_GYRO_SCALE.

enumerator TY_STRUCT_IMU_CAM_TO_IMU: IMU camera to imu matrix, see TY_CAMERA_TO_IMU.

enumerator TY_ENUM_IMU_FPS: IMU fps, see TY_IMU_FPS_LIST.

enumerator TY_INT_SGBM_IMAGE_NUM: SGBM image channel num.

enumerator TY_INT_SGBM_DISPARITY_NUM: SGBM disparity num.

enumerator TY_INT_SGBM_DISPARITY_OFFSET: SGBM disparity offset.

enumerator TY_INT_SGBM_MATCH_WIN_HEIGHT: SGBM match window height.

enumerator TY_INT_SGBM_SEMI_PARAM_P1: SGBM semi global param p1.

enumerator TY_INT_SGBM_SEMI_PARAM_P2: SGBM semi global param p2.

enumerator TY_INT_SGBM_UNIQUE_FACTOR: SGBM uniqueness factor param.

enumerator TY_INT_SGBM_UNIQUE_ABSDIFF: SGBM uniqueness min absolute diff.

enumerator TY_INT_SGBM_COST_PARAM: SGBM cost param.

enumerator TY_BOOL_SGBM_HFILTER_HALF_WIN: SGBM enable half window size.

enumerator TY_INT_SGBM_MATCH_WIN_WIDTH: SGBM match window width.

enumerator TY_BOOL_SGBM_MEDFILTER: SGBM enable median filter.

enumerator TY_BOOL_SGBM_LRC: SGBM enable left right consist check.

enumerator TY_INT_SGBM_LRC_DIFF: SGBM max diff.

enumerator TY_INT_SGBM_MEDFILTER_THRESH: SGBM median filter thresh.

enumerator TY_INT_SGBM_SEMI_PARAM_P1_SCALE: SGBM semi global param p1 scale.

enumerator TY_ENUM_DEPTH_QUALITY: the quality of generated depth, see TY_DEPTH_QUALITY

enumerator TY_INT_FILTER_THRESHOLD: the threshold of the noise filter, 0 for disabled

enumerator TY_INT_TOF_CHANNEL: the frequency channel of tof

enumerator TY_INT_TOF_MODULATION_THRESHOLD: the threshold of the tof modulation

enumerator TY_STRUCT_TOF_FREQ: the frequency of tof, see TY_TOF_FREQ

enumerator TY_BOOL_TOF_ANTI_INTERFERENCE: cooperation if multi-device used

enum TY_DEPTH_QUALITY_LIST

Values:

enumerator TY_DEPTH_QUALITY_BASIC

enumerator TY_DEPTH_QUALITY_MEDIUM

enumerator TY_DEPTH_QUALITY_HIGH

enum TY_TRIGGER_POL_LIST

set external trigger signal edge

Values:

enumerator TY_TRIGGER_POL_FALLINGEDGE

enumerator TY_TRIGGER_POL_RISINGEDGE

enum TY_INTERFACE_TYPE_LIST

Interface type definition.

See also

TYGetInterfaceList

Values:

enumerator TY_INTERFACE_UNKNOWN

enumerator TY_INTERFACE_RAW

enumerator TY_INTERFACE_USB

enumerator TY_INTERFACE_ETHERNET

enumerator TY_INTERFACE_IEEE80211

enumerator TY_INTERFACE_ALL

enum TY_ACCESS_MODE_LIST

Indicate a feature is readable or writable.

See also

TYGetFeatureInfo

Values:

enumerator TY_ACCESS_READABLE

enumerator TY_ACCESS_WRITABLE

enum TY_STREAM_ASYNC_MODE_LIST

stream async mode

Values:

enumerator TY_STREAM_ASYNC_OFF

enumerator TY_STREAM_ASYNC_DEPTH

enumerator TY_STREAM_ASYNC_RGB

enumerator TY_STREAM_ASYNC_DEPTH_RGB

enumerator TY_STREAM_ASYNC_ALL

enum TY_PIXEL_BITS_LIST

Pixel size type definitions to define the pixel size in bits.

See also

TY_PIXEL_FORMAT_LIST

Values:

enumerator TY_PIXEL_8BIT

enumerator TY_PIXEL_16BIT

enumerator TY_PIXEL_24BIT

enumerator TY_PIXEL_32BIT

enumerator TY_PIXEL_10BIT

enumerator TY_PIXEL_12BIT

enumerator TY_PIXEL_14BIT

enumerator TY_PIXEL_48BIT

enumerator TY_PIXEL_64BIT

enum TY_PIXEL_FORMAT_LIST

pixel format definitions

Values:

enumerator TY_PIXEL_FORMAT_UNDEFINED

enumerator TY_PIXEL_FORMAT_MONO: 0x10000000

enumerator TY_PIXEL_FORMAT_BAYER8GB: 0x11000000

enumerator TY_PIXEL_FORMAT_BAYER8BG: 0x12000000

enumerator TY_PIXEL_FORMAT_BAYER8GR: 0x13000000

enumerator TY_PIXEL_FORMAT_BAYER8RG: 0x14000000

enumerator TY_PIXEL_FORMAT_BAYER8GRBG

enumerator TY_PIXEL_FORMAT_BAYER8RGGB

enumerator TY_PIXEL_FORMAT_BAYER8GBRG

enumerator TY_PIXEL_FORMAT_BAYER8BGGR

enumerator TY_PIXEL_FORMAT_CSI_MONO10: 0x50000000

enumerator TY_PIXEL_FORMAT_CSI_BAYER10GRBG: 0x51000000

enumerator TY_PIXEL_FORMAT_CSI_BAYER10RGGB: 0x52000000

enumerator TY_PIXEL_FORMAT_CSI_BAYER10GBRG: 0x53000000

enumerator TY_PIXEL_FORMAT_CSI_BAYER10BGGR: 0x54000000

enumerator TY_PIXEL_FORMAT_CSI_MONO12: 0x60000000

enumerator TY_PIXEL_FORMAT_CSI_BAYER12GRBG: 0x61000000

enumerator TY_PIXEL_FORMAT_CSI_BAYER12RGGB: 0x62000000

enumerator TY_PIXEL_FORMAT_CSI_BAYER12GBRG: 0x63000000

enumerator TY_PIXEL_FORMAT_CSI_BAYER12BGGR: 0x64000000

enumerator TY_PIXEL_FORMAT_DEPTH16: 0x20000000

enumerator TY_PIXEL_FORMAT_YVYU: 0x21000000, yvyu422

enumerator TY_PIXEL_FORMAT_YUYV: 0x22000000, yuyv422

enumerator TY_PIXEL_FORMAT_MONO16: 0x23000000,

enumerator TY_PIXEL_FORMAT_TOF_IR_MONO16: 0xa4000000,

enumerator TY_PIXEL_FORMAT_RGB: 0x30000000

enumerator TY_PIXEL_FORMAT_BGR: 0x31000000

enumerator TY_PIXEL_FORMAT_JPEG: 0x32000000

enumerator TY_PIXEL_FORMAT_MJPG: 0x33000000

enumerator TY_PIXEL_FORMAT_RGB48: 0x80000000

enumerator TY_PIXEL_FORMAT_BGR48: 0x81000000

enumerator TY_PIXEL_FORMAT_XYZ48: 0x82000000

enum TY_RESOLUTION_MODE_LIST

predefined resolution list

Values:

enumerator TY_RESOLUTION_MODE_160x100: 0x000a0078

enumerator TY_RESOLUTION_MODE_160x120: 0x000a0078

enumerator TY_RESOLUTION_MODE_240x320: 0x000f0140

enumerator TY_RESOLUTION_MODE_320x180: 0x001400b4

enumerator TY_RESOLUTION_MODE_320x200: 0x001400c8

enumerator TY_RESOLUTION_MODE_320x240: 0x001400f0

enumerator TY_RESOLUTION_MODE_480x640: 0x001e0280

enumerator TY_RESOLUTION_MODE_640x360: 0x00280168

enumerator TY_RESOLUTION_MODE_640x400: 0x00280190

enumerator TY_RESOLUTION_MODE_640x480: 0x002801e0

enumerator TY_RESOLUTION_MODE_960x1280: 0x003c0500

enumerator TY_RESOLUTION_MODE_1280x720: 0x005002d0

enumerator TY_RESOLUTION_MODE_1280x800: 0x00500320

enumerator TY_RESOLUTION_MODE_1280x960: 0x005003c0

enumerator TY_RESOLUTION_MODE_1920x1080: 0x00780438

enumerator TY_RESOLUTION_MODE_2560x1920: 0x00a00780

enumerator TY_RESOLUTION_MODE_2592x1944: 0x00a20798

enumerator TY_RESOLUTION_MODE_1920x1440: 0x007805a0

enumerator TY_RESOLUTION_MODE_240x96: 0x000f0060

enumerator TY_RESOLUTION_MODE_2048x1536: 0x00800600

enum TY_IMAGE_MODE_LIST

Predefined Image Mode List image mode controls image resolution & format predefined image modes named like TY_IMAGE_MODE_MONO_160x120,TY_IMAGE_MODE_RGB_1280x960.

Values:

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enumerator TY_DECLARE_IMAGE_MODE1

enum TY_TRIGGER_MODE_LIST

See also

refer to sample SimpleView_TriggerMode for detail usage

Values:

enumerator TY_TRIGGER_MODE_OFF: not trigger mode, continuous mode

enumerator TY_TRIGGER_MODE_SLAVE: slave mode, receive soft/hardware triggers

enumerator TY_TRIGGER_MODE_M_SIG: master mode 1, sending one trigger signal once received a soft/hardware trigger

enumerator TY_TRIGGER_MODE_M_PER: master mode 2, periodic sending one trigger signals, ‘fps’ param should be set

enumerator TY_TRIGGER_MODE_SIG_PASS

enumerator TY_TRIGGER_MODE_PER_PASS

enumerator TY_TRIGGER_MODE_TIMER_LIST

enumerator TY_TRIGGER_MODE_TIMER_PERIOD

enumerator TY_TRIGGER_MODE_PER_PASS2: trigger mode 30,Alternate output depth image/ir image

enumerator TY_TRIGGER_WORK_MODE31

enumerator TY_TRIGGER_MODE_SIG_LASER

enum TY_TIME_SYNC_TYPE_LIST

type of time sync

Values:

enumerator TY_TIME_SYNC_TYPE_NONE

enumerator TY_TIME_SYNC_TYPE_HOST

enumerator TY_TIME_SYNC_TYPE_NTP

enumerator TY_TIME_SYNC_TYPE_PTP

enumerator TY_TIME_SYNC_TYPE_CAN

enumerator TY_TIME_SYNC_TYPE_PTP_MASTER

enum TY_IMU_FPS_LIST

Values:

enumerator TY_IMU_FPS_100HZ

enumerator TY_IMU_FPS_200HZ

enumerator TY_IMU_FPS_400HZ

Functions

static inline bool TYIsNetworkInterface(int32_t interfaceType)

static inline void TYIntToIPv4(uint32_t addr, uint8_t out[4])

static inline uint32_t TYIPv4ToInt(uint8_t ip[4])

static inline TY_IMAGE_DATA TYInitImageData(size_t size, void *buffer, size_t width, size_t height): init a TY_IMAGE_DATA struct

static inline TY_FEATURE_TYPE TYFeatureType(TY_FEATURE_ID id): get feature format type from feature id

static inline int32_t TYPixelSize(TY_IMAGE_MODE imageMode): deprecated: get pixel size in byte, Invalid for 10/12/14bit mode

static inline int32_t TYBitsPerPixel(TY_IMAGE_MODE imageMode): get pixel size in bits

static inline int32_t TYPixelLineSize(int width, TY_IMAGE_MODE imageMode): get line size in bytes

static inline TY_IMAGE_MODE TYImageMode(TY_PIXEL_FORMAT pix, TY_RESOLUTION_MODE res): make a image mode from pixel format & resolution mode

static inline TY_RESOLUTION_MODE TYResolutionMode2(int width, int height): get a resoltuion mode from width & height

static inline TY_IMAGE_MODE TYImageMode2(TY_PIXEL_FORMAT pix, int width, int height): create a image mode from pixel format , width & height

static inline TY_PIXEL_FORMAT TYPixelFormat(TY_IMAGE_MODE imageMode): get pixel format from image mode

static inline TY_RESOLUTION_MODE TYResolutionMode(TY_IMAGE_MODE imageMode): get a resoltuion mode from image mode

static inline int32_t TYImageWidth(TY_IMAGE_MODE imageMode): get image width from image mode

static inline int32_t TYImageHeight(TY_IMAGE_MODE imageMode): get image height from image mode

TY_EXTC TY_EXPORT const char *TY_STDC TYErrorString (TY_STATUS errorID)

Get error information.

Parameters:: errorID – [in] Error id.
Returns:: Error string.

static inline TY_STATUS TYInitLib(void)

Init this library.

We make this function to be static inline, because we do a version check here. Some user may use the mismatched header file and dynamic library, and that’s quite difficult to locate the error.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_ERROR – Has been inited.

TY_CAPI TYDeinitLib(void)

Deinit this library.

Return values:: TY_STATUS_OK – Succeed.

TY_CAPI TYLibVersion(TY_VERSION_INFO *version)

Get current library version.

Parameters:

version – [out] Version infomation to be filled.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NULL_POINTER – buffer is NULL.

TY_CAPI TYUpdateInterfaceList()

Update current interfaces.

call before TYGetInterfaceList

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.

TY_CAPI TYGetInterfaceNumber(uint32_t *pNumIfaces)

Get number of current interfaces.

Parameters:

pNumIfaces – [out] Number of interfaces.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.
TY_STATUS_NULL_POINTER – deviceNumber is NULL.

TY_CAPI TYGetInterfaceList(TY_INTERFACE_INFO *pIfaceInfos, uint32_t bufferCount, uint32_t *filledCount)

Get interface info list.

Parameters:

pIfaceInfos – [out] Array of interface infos to be filled.
bufferCount – [in] Array size of interface infos.
filledCount – [out] Number of filled TY_INTERFACE_INFO.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.
TY_STATUS_NULL_POINTER – pIfaceInfos or filledCount is NULL.

TY_CAPI TYHasInterface(const char *ifaceID, bool *value)

Check if has interface.

See also

TYGetInterfaceList

Parameters:

ifaceID – [in] Interface ID string, can be get from TY_INTERFACE_INFO.
value – [out] True if the interface exists.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.
TY_STATUS_NULL_POINTER – ifaceID or outHandle is NULL.

TY_CAPI TYOpenInterface(const char *ifaceID, TY_INTERFACE_HANDLE *outHandle)

Open specified interface.

See also

TYGetInterfaceList

Parameters:

ifaceID – [in] Interface ID string, can be get from TY_INTERFACE_INFO.
outHandle – [out] Handle of opened interface.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.
TY_STATUS_NULL_POINTER – ifaceID or outHandle is NULL.
TY_STATUS_INVALID_INTERFACE – Interface not found.

TY_CAPI TYCloseInterface(TY_INTERFACE_HANDLE ifaceHandle)

Close interface.

Parameters:

ifaceHandle – [in] Interface to be closed.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.
TY_STATUS_INVALID_INTERFACE – Interface not found.

TY_CAPI TYUpdateDeviceList(TY_INTERFACE_HANDLE ifaceHandle)

Update current connected devices.

Parameters:

ifaceHandle – [in] Interface handle.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.
TY_STATUS_INVALID_INTERFACE – Invalid interface handle.

TY_CAPI TYUpdateAllDeviceList()

Update current connected devices.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.

TY_CAPI TYGetDeviceNumber(TY_INTERFACE_HANDLE ifaceHandle, uint32_t *deviceNumber)

Get number of current connected devices.

Parameters:

ifaceHandle – [in] Interface handle.
deviceNumber – [out] Number of connected devices.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.
TY_STATUS_INVALID_INTERFACE – Invalid interface handle.
TY_STATUS_NULL_POINTER – deviceNumber is NULL.

TY_CAPI TYGetDeviceList(TY_INTERFACE_HANDLE ifaceHandle, TY_DEVICE_BASE_INFO *deviceInfos, uint32_t bufferCount, uint32_t *filledDeviceCount)

Get device info list.

Parameters:

ifaceHandle – [in] Interface handle.
deviceInfos – [out] Device info array to be filled.
bufferCount – [in] Array size of deviceInfos.
filledDeviceCount – [out] Number of filled TY_DEVICE_BASE_INFO.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.
TY_STATUS_INVALID_INTERFACE – Invalid interface handle.
TY_STATUS_NULL_POINTER – deviceInfos or filledDeviceCount is NULL.

TY_CAPI TYHasDevice(TY_INTERFACE_HANDLE ifaceHandle, const char *deviceID, bool *value)

Check whether the interface has the specified device.

Parameters:

ifaceHandle – [in] Interface handle.
deviceID – [in] Device ID string, can be get from TY_DEVICE_BASE_INFO.
value – [out] True if the device exists.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.
TY_STATUS_INVALID_INTERFACE – Invalid interface handle.
TY_STATUS_NULL_POINTER – deviceID or value is NULL.

TY_CAPI TYOpenDevice(TY_INTERFACE_HANDLE ifaceHandle, const char *deviceID, TY_DEV_HANDLE *outDeviceHandle, TY_FW_ERRORCODE *outFwErrorcode = NULL)

Open device by device ID.

Parameters:

ifaceHandle – [in] Interface handle.
deviceID – [in] Device ID string, can be get from TY_DEVICE_BASE_INFO.
deviceHandle – [out] Handle of opened device. Valid only if TY_STATUS_OK or TY_FW_ERRORCODE returned.
outFwErrorcode – [out] Firmware errorcode. Valid only if TY_FW_ERRORCODE returned.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.
TY_STATUS_INVALID_INTERFACE – Invalid interface handle.
TY_STATUS_NULL_POINTER – deviceID or deviceHandle is NULL.
TY_STATUS_INVALID_PARAMETER – Device not found.
TY_STATUS_BUSY – Device has been opened.
TY_STATUS_DEVICE_ERROR – Open device failed.

TY_CAPI TYOpenDeviceWithIP(TY_INTERFACE_HANDLE ifaceHandle, const char *IP, TY_DEV_HANDLE *deviceHandle)

Open device by device IP, useful when a device is not listed.

Parameters:

ifaceHandle – [in] Interface handle.
IP – [in] Device IP.
deviceHandle – [out] Handle of opened device.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.
TY_STATUS_INVALID_INTERFACE – Invalid interface handle.
TY_STATUS_NULL_POINTER – IP or deviceHandle is NULL.
TY_STATUS_INVALID_PARAMETER – Device not found.
TY_STATUS_BUSY – Device has been opened, may occupied somewhere else.
TY_STATUS_DEVICE_ERROR – Open device failed.

TY_CAPI TYGetDeviceInterface(TY_DEV_HANDLE hDevice, TY_INTERFACE_HANDLE *pIface)

Get interface handle by device handle.

Parameters:

hDevice – [in] Device handle.
pIface – [out] Interface handle.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_NULL_POINTER – pIface is NULL.

TY_CAPI TYForceDeviceIP(TY_INTERFACE_HANDLE ifaceHandle, const char *MAC, const char *newIP, const char *newNetMask, const char *newGateway)

Force a ethernet device to use new IP address, useful when device use persistent IP and cannot be found.

Parameters:

ifaceHandle – [in] Interface handle.
MAC – [in] Device MAC, should be “xx:xx:xx:xx:xx:xx”.
newIP – [in] New IP.
newNetMask – [in] New subnet mask.
newGateway – [in] New gateway.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NOT_INITED – TYInitLib not called.
TY_STATUS_INVALID_INTERFACE – Invalid interface handle.
TY_STATUS_WRONG_TYPE – Wrong interface type, should be network.
TY_STATUS_NULL_POINTER – MAC or newIP/newNetMask/newGateway is NULL.
TY_STATUS_INVALID_PARAMETER – MAC is not valid.
TY_STATUS_TIMEOUT – No device found.
TY_STATUS_DEVICE_ERROR – Set new IP failed.

TY_CAPI TYCloseDevice(TY_DEV_HANDLE hDevice, bool reboot = false)

Close device by device handle.

Parameters:

hDevice – [in] Device handle.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_IDLE – Device has been closed.

TY_CAPI TYGetDeviceInfo(TY_DEV_HANDLE hDevice, TY_DEVICE_BASE_INFO *info)

Get base info of the open device.

Parameters:

hDevice – [in] Device handle.
info – [out] Base info out.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_NULL_POINTER – componentIDs is NULL.

TY_CAPI TYGetComponentIDs(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID *componentIDs)

Get all components IDs.

See also

TY_DEVICE_COMPONENT_LIST

Parameters:

hDevice – [in] Device handle.
componentIDs – [out] All component IDs this device has. (bit flag).

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_NULL_POINTER – componentIDs is NULL.

TY_CAPI TYGetEnabledComponents(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID *componentIDs)

Get all enabled components IDs.

See also

TY_DEVICE_COMPONENT_LIST

Parameters:

hDevice – [in] Device handle.
componentIDs – [out] Enabled component IDs.(bit flag)

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_NULL_POINTER – componentIDs is NULL.

TY_CAPI TYEnableComponents(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentIDs)

Enable components.

Parameters:

hDevice – [in] Device handle.
componentIDs – [in] Components to be enabled.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Some components specified by componentIDs are invalid.
TY_STATUS_BUSY – Device is capturing.

TY_CAPI TYDisableComponents(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentIDs)

Disable components.

See also

TY_DEVICE_COMPONENT_LIST

Parameters:

hDevice – [in] Device handle.
componentIDs – [in] Components to be disabled.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Some components specified by componentIDs are invalid.
TY_STATUS_BUSY – Device is capturing.

TY_CAPI TYGetFrameBufferSize(TY_DEV_HANDLE hDevice, uint32_t *bufferSize)

Get total buffer size of one frame in current configuration.

Parameters:

hDevice – [in] Device handle.
bufferSize – [out] Buffer size per frame.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_NULL_POINTER – bufferSize is NULL.

TY_CAPI TYEnqueueBuffer(TY_DEV_HANDLE hDevice, void *buffer, uint32_t bufferSize)

Enqueue a user allocated buffer.

Parameters:

hDevice – [in] Device handle.
buffer – [in] Buffer to be enqueued.
bufferSize – [in] Size of the input buffer.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_NULL_POINTER – buffer is NULL.
TY_STATUS_WRONG_SIZE – The input buffer is not large enough.

TY_CAPI TYClearBufferQueue(TY_DEV_HANDLE hDevice)

Clear the internal buffer queue, so that user can release all the buffer.

Parameters:

hDevice – [in] Device handle.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_BUSY – Device is capturing.

TY_CAPI TYStartCapture(TY_DEV_HANDLE hDevice)

Start capture.

Parameters:

hDevice – [in] Device handle.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – No components enabled.
TY_STATUS_BUSY – Device has been started.
TY_STATUS_DEVICE_ERROR – Start capture failed.

TY_CAPI TYStopCapture(TY_DEV_HANDLE hDevice)

Stop capture.

Parameters:

hDevice – [in] Device handle.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_IDLE – Device is not capturing.
TY_STATUS_DEVICE_ERROR – Stop capture failed.

TY_CAPI TYSendSoftTrigger(TY_DEV_HANDLE hDevice)

Send a software trigger to capture a frame when device works in trigger mode.

Parameters:

hDevice – [in] Device handle.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_FEATURE – Not support soft trigger.
TY_STATUS_IDLE – Device has not started capture.
TY_STATUS_WRONG_MODE – Not in trigger mode.

TY_CAPI TYRegisterEventCallback(TY_DEV_HANDLE hDevice, TY_EVENT_CALLBACK callback, void *userdata)

Register device status callback.

Register NULL to clean callback.

Parameters:

hDevice – [in] Device handle.
callback – [in] Callback function.
userdata – [in] User private data.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_BUSY – Device is capturing.

TY_CAPI TYRegisterImuCallback(TY_DEV_HANDLE hDevice, TY_IMU_CALLBACK callback, void *userdata)

Register imu callback.

Register NULL to clean callback.

Parameters:

hDevice – [in] Device handle.
callback – [in] Callback function.
userdata – [in] User private data.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_BUSY – Device is capturing.

TY_CAPI TYFetchFrame(TY_DEV_HANDLE hDevice, TY_FRAME_DATA *frame, int32_t timeout)

Fetch one frame.

Parameters:

hDevice – [in] Device handle.
frame – [out] Frame data to be filled.
timeout – [in] Timeout in milliseconds. <0 for infinite.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_NULL_POINTER – frame is NULL.
TY_STATUS_IDLE – Device capturing is not started.
TY_STATUS_WRONG_MODE – Callback has been registered, this function is disabled.
TY_STATUS_TIMEOUT – Timeout.

TY_CAPI TYHasFeature(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, bool *value)

Check whether a component has a specific feature.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
value – [out] Whether has feature.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_NULL_POINTER – value is NULL.

TY_CAPI TYGetFeatureInfo(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, TY_FEATURE_INFO *featureInfo)

Get feature info.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
featureInfo – [out] Feature info.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_NULL_POINTER – featureInfo is NULL.

TY_CAPI TYGetIntRange(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, TY_INT_RANGE *intRange)

Get value range of integer feature.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
intRange – [out] Integer range to be filled.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_INT.
TY_STATUS_NULL_POINTER – intRange is NULL.

TY_CAPI TYGetInt(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, int32_t *value)

Get value of integer feature.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
value – [out] Integer value.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_INT.
TY_STATUS_NULL_POINTER – value is NULL.

TY_CAPI TYSetInt(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, int32_t value)

Set value of integer feature.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
value – [in] Integer value.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_NOT_PERMITTED – The feature is not writable.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_INT.
TY_STATUS_OUT_OF_RANGE – value is out of range.
TY_STATUS_BUSY – Device is capturing, the feature is locked.

TY_CAPI TYGetFloatRange(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, TY_FLOAT_RANGE *floatRange)

Get value range of float feature.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
floatRange – [out] Float range to be filled.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_FLOAT.
TY_STATUS_NULL_POINTER – floatRange is NULL.

TY_CAPI TYGetFloat(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, float *value)

Get value of float feature.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
value – [out] Float value.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_FLOAT.
TY_STATUS_NULL_POINTER – value is NULL.

TY_CAPI TYSetFloat(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, float value)

Set value of float feature.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
value – [in] Float value.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_NOT_PERMITTED – The feature is not writable.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_FLOAT.
TY_STATUS_OUT_OF_RANGE – value is out of range.
TY_STATUS_BUSY – Device is capturing, the feature is locked.

TY_CAPI TYGetEnumEntryCount(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, uint32_t *entryCount)

Get number of enum entries.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
entryCount – [out] Entry count.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_ENUM.
TY_STATUS_NULL_POINTER – entryCount is NULL.

TY_CAPI TYGetEnumEntryInfo(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, TY_ENUM_ENTRY *entries, uint32_t entryCount, uint32_t *filledEntryCount)

Get list of enum entries.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
entries – [out] Output entries.
entryCount – [in] Array size of input parameter “entries”.
filledEntryCount – [out] Number of filled entries.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_ENUM.
TY_STATUS_NULL_POINTER – entries or filledEntryCount is NULL.

TY_CAPI TYGetEnum(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, uint32_t *value)

Get current value of enum feature.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
value – [out] Enum value.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_ENUM.
TY_STATUS_NULL_POINTER – value is NULL.

TY_CAPI TYSetEnum(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, uint32_t value)

Set value of enum feature.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
value – [in] Enum value.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_NOT_PERMITTED – The feature is not writable.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_ENUM.
TY_STATUS_INVALID_PARAMETER – value is invalid.
TY_STATUS_BUSY – Device is capturing, the feature is locked.

TY_CAPI TYGetBool(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, bool *value)

Get value of bool feature.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
value – [out] Bool value.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_BOOL.
TY_STATUS_NULL_POINTER – value is NULL.

TY_CAPI TYSetBool(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, bool value)

Set value of bool feature.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
value – [in] Bool value.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_NOT_PERMITTED – The feature is not writable.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_BOOL.
TY_STATUS_BUSY – Device is capturing, the feature is locked.

TY_CAPI TYGetStringLength(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, uint32_t *size)

Get internal buffer size of string feature.

See also

TYGetString

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
size – [out] String length including ‘\0’.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_STRING.
TY_STATUS_NULL_POINTER – size is NULL.

TY_CAPI TYGetString(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, char *buffer, uint32_t bufferSize)

Get value of string feature.

See also

TYGetStringLength

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
buffer – [out] String buffer.
bufferSize – [in] Size of buffer.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_STRING.
TY_STATUS_NULL_POINTER – buffer is NULL.

TY_CAPI TYSetString(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, const char *buffer)

Set value of string feature.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
buffer – [in] String buffer.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_NOT_PERMITTED – The feature is not writable.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_STRING.
TY_STATUS_NULL_POINTER – buffer is NULL.
TY_STATUS_OUT_OF_RANGE – Input string is too long.
TY_STATUS_BUSY – Device is capturing, the feature is locked.

TY_CAPI TYGetStruct(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, void *pStruct, uint32_t structSize)

Get value of struct.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
pStruct – [out] Pointer of struct.
structSize – [in] Size of input buffer pStruct..

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_STRUCT.
TY_STATUS_NULL_POINTER – pStruct is NULL.
TY_STATUS_WRONG_SIZE – structSize incorrect.

TY_CAPI TYSetStruct(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, void *pStruct, uint32_t structSize)

Set value of struct.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
pStruct – [in] Pointer of struct.
structSize – [in] Size of struct.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_NOT_PERMITTED – The feature is not writable.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_STRUCT.
TY_STATUS_NULL_POINTER – pStruct is NULL.
TY_STATUS_WRONG_SIZE – structSize incorrect.
TY_STATUS_BUSY – Device is capturing, the feature is locked.

TY_CAPI TYGetByteArraySize(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, uint32_t *pSize)

Get the size of specified byte array zone .

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
pSize – [out] size of specified byte array zone.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_BYTEARRAY.
TY_STATUS_NULL_POINTER – pSize is NULL.

TY_CAPI TYGetDeviceFeatureNumber(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, uint32_t *size)

Get the size of device features .

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
pSize – [out] size of all feature cnt.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_NULL_POINTER – pSize is NULL.

TY_CAPI TYGetDeviceFeatureInfo(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_INFO *featureInfo, uint32_t entryCount, uint32_t *filledEntryCount)

Get the all features by comp id.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureInfo – [out] Output feature info.
entryCount – [in] Array size of input parameter “featureInfo”.
filledEntryCount – [out] Number of filled featureInfo.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_NULL_POINTER – featureInfo or filledEntryCount is NULL.

TY_CAPI TYGetByteArray(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, uint8_t *pBuffer, uint32_t bufferSize)

Read byte array from device.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
pbuffer – [out] byte buffer.
bufferSize – [in] Size of buffer.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_BYTEARRAY.
TY_STATUS_NULL_POINTER – pbuffer is NULL.
TY_STATUS_WRONG_SIZE – bufferSize incorrect.

TY_CAPI TYSetByteArray(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, const uint8_t *pBuffer, uint32_t bufferSize)

Write byte array to device.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
pbuffer – [out] byte buffer.
bufferSize – [in] Size of buffer.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_NOT_PERMITTED – The feature is not writable.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_BYTEARRAY.
TY_STATUS_NULL_POINTER – pbuffer is NULL.
TY_STATUS_WRONG_SIZE – bufferSize incorrect.
TY_STATUS_BUSY – Device is capturing, the feature is locked.

TY_CAPI TYGetByteArrayAttr(TY_DEV_HANDLE hDevice, TY_COMPONENT_ID componentID, TY_FEATURE_ID featureID, TY_BYTEARRAY_ATTR *pAttr)

Write byte array to device.

Parameters:

hDevice – [in] Device handle.
componentID – [in] Component ID.
featureID – [in] Feature ID.
pAttr – [out] byte array attribute to be filled.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_INVALID_HANDLE – Invalid device handle.
TY_STATUS_INVALID_COMPONENT – Invalid component ID.
TY_STATUS_INVALID_FEATURE – Invalid feature ID.
TY_STATUS_NOT_PERMITTED – The feature is not writable.
TY_STATUS_WRONG_TYPE – The feature’s type is not TY_FEATURE_BYTEARRAY.
TY_STATUS_NULL_POINTER – pbuffer is NULL.

TY_CAPI _TYInitLib(void)

Variables

typedef enum

typedef TY_DO_5V = 1

typedef TY_DO_12V = 2

typedef TY_E_VOLT_T_LIST

typedef TY_DO_HIGH = 1

typedef TY_DO_PWM = 2

typedef TY_DO_CAM_TRIG = 3

typedef TY_E_DO_MODE_LIST

typedef TY_DI_NE_INT = 1

typedef TY_DI_PE_INT = 2

typedef TY_E_DI_MODE_LIST

typedef TY_DI_INT_TRIG_CAP = 1

typedef TY_DI_INT_EVENT = 2

typedef TY_E_DI_INT_ACTION_LIST

struct TY_VERSION_INFO

#include <TYApi.h>

Public Members

int32_t major

int32_t minor

int32_t patch

int32_t reserved

struct TY_DEVICE_NET_INFO

#include <TYApi.h>

device network information

Public Members

char mac[32]

char ip[32]

char netmask[32]

char gateway[32]

char broadcast[32]

char reserved[96]

struct TY_DEVICE_USB_INFO

#include <TYApi.h>

Public Members

int bus

int addr

char reserved[248]

struct TY_INTERFACE_INFO

#include <TYApi.h>

See also

TYGetInterfaceList

Public Members

char name[32]

char id[32]

TY_INTERFACE_TYPE type

char reserved[4]

TY_DEVICE_NET_INFO netInfo

struct TY_DEVICE_BASE_INFO

#include <TYApi.h>

See also

TYGetDeviceList

Public Members

TY_INTERFACE_INFO iface

char id[32]: device serial number

char vendorName[32]

char userDefinedName[32]

char modelName[32]: device model name

TY_VERSION_INFO hardwareVersion: deprecated

TY_VERSION_INFO firmwareVersion: deprecated

TY_DEVICE_NET_INFO netInfo

TY_DEVICE_USB_INFO usbInfo

union TY_DEVICE_BASE_INFO

char buildHash[256]

char configVersion[256]

char reserved[256]

struct TY_FEATURE_INFO

#include <TYApi.h>

Public Members

bool isValid: true if feature exists, false otherwise

TY_ACCESS_MODE accessMode: feature access privilege

bool writableAtRun: feature can be written while capturing

char reserved0[1]

TY_COMPONENT_ID componentID: owner of this feature

TY_FEATURE_ID featureID: feature unique id

char name[32]: describe string

TY_COMPONENT_ID bindComponentID: component ID current feature bind to

TY_FEATURE_ID bindFeatureID: feature ID current feature bind to

char reserved[252]

struct TY_INT_RANGE

#include <TYApi.h>

Public Members

int32_t min

int32_t max

int32_t inc: increaing step

int32_t reserved[1]

struct TY_FLOAT_RANGE

#include <TYApi.h>

float range data structure

See also

TYGetFloatRange

Public Members

float min

float max

float inc: increaing step

float reserved[1]

struct TY_BYTEARRAY_ATTR

#include <TYApi.h>

byte array data structure

See also

TYGetByteArray

Public Members

int32_t size: Bytes array size in bytes.

int32_t unit_size: unit size in bytes for special parse

int32_t valid_size: valid size in bytes in case has reserved member, Must be multiple of unit_size, mem_length = valid_size/unit_size

struct TY_ENUM_ENTRY

#include <TYApi.h>

enum feature entry information

See also

TYGetEnumEntryInfo

Public Members

char description[64]

uint32_t value

uint32_t reserved[3]

struct TY_VECT_3F

#include <TYApi.h>

Public Members

float x

float y

float z

struct TY_CAMERA_INTRINSIC

#include <TYApi.h>

a 3x3 matrix

.	.	.
fx	0	cx
0	fy	cy
0	0	1

See also

TYGetStruct Usage:

TY_CAMERA_INTRINSIC intrinsic;
TYGetStruct(hDevice, some_compoent, TY_STRUCT_CAM_INTRINSIC, &intrinsic, sizeof(intrinsic));

Public Members

float data[3 * 3]

struct TY_CAMERA_EXTRINSIC

#include <TYApi.h>

a 4x4 matrix

.	.	.	.
r11	r12	r13	t1
r21	r22	r23	t2
r31	r32	r33	t3
0	0	0	1

See also

TYGetStruct Usage:

TY_CAMERA_EXTRINSIC extrinsic;
TYGetStruct(hDevice, some_compoent, TY_STRUCT_EXTRINSIC, &extrinsic, sizeof(extrinsic));

Public Members

float data[4 * 4]

struct TY_CAMERA_DISTORTION

#include <TYApi.h>

camera distortion parameters

See also

TYGetStruct Usage:

TY_CAMERA_DISTORTION distortion;
TYGetStruct(hDevice, some_compoent, TY_STRUCT_CAM_DISTORTION, &distortion, sizeof(distortion));

Public Members

float data[12]: Definition is compatible with opencv3.0+ :k1,k2,p1,p2,k3,k4,k5,k6,s1,s2,s3,s4.

struct TY_CAMERA_CALIB_INFO

#include <TYApi.h>

camera ‘s cailbration data

See also

TYGetStruct

Public Members

int32_t intrinsicWidth

int32_t intrinsicHeight

TY_CAMERA_INTRINSIC intrinsic

TY_CAMERA_EXTRINSIC extrinsic

TY_CAMERA_DISTORTION distortion

struct TY_TRIGGER_PARAM

#include <TYApi.h>

Public Members

TY_TRIGGER_MODE mode

int8_t fps

int8_t rsvd

struct TY_TRIGGER_PARAM_EX

#include <TYApi.h>

Public Members

TY_TRIGGER_MODE mode

int8_t fps

int8_t duty

int32_t laser_stream

int32_t led_stream

int32_t led_expo

int32_t led_gain

int32_t ir_gain[2]

int32_t rsvd[32]

union TY_TRIGGER_PARAM_EX

struct TY_TRIGGER_TIMER_LIST

#include <TYApi.h>

Public Members

uint64_t start_time_us

uint32_t offset_us_count

uint32_t offset_us_list[50]

struct TY_TRIGGER_TIMER_PERIOD

#include <TYApi.h>

Public Members

uint64_t start_time_us

uint32_t trigger_count

uint32_t period_us

struct TY_AEC_ROI_PARAM

#include <TYApi.h>

Public Members

uint32_t x

uint32_t y

uint32_t w

uint32_t h

struct TY_CAMERA_STATISTICS

#include <TYApi.h>

Public Members

uint64_t packetReceived

uint64_t packetLost

uint64_t imageOutputed

uint64_t imageDropped

uint8_t rsvd[1024]

struct TY_IMU_DATA

#include <TYApi.h>

Public Members

uint64_t timestamp

float acc_x

float acc_y

float acc_z

float gyro_x

float gyro_y

float gyro_z

float temperature

float reserved[1]

struct TY_ACC_BIAS

#include <TYApi.h>

a 3x3 matrix

.	.	.
BIASx	BIASy	BIASz

Public Members

float data[3]

struct TY_ACC_MISALIGNMENT

#include <TYApi.h>

a 3x3 matrix

|.

|.|.|

.	.	.
1	-GAMAyz	GAMAzy
GAMAxz	1	-GAMAzx
-GAMAxy	GAMAyx	1

Public Members

float data[3 * 3]

struct TY_ACC_SCALE

#include <TYApi.h>

a 3x3 matrix

.	.	.
SCALEx	0	0
0	SCALEy	0
0	0	SCALEz

Public Members

float data[3 * 3]

struct TY_GYRO_BIAS

#include <TYApi.h>

a 3x3 matrix

.	.	.
BIASx	BIASy	BIASz

Public Members

float data[3]

struct TY_GYRO_MISALIGNMENT

#include <TYApi.h>

a 3x3 matrix

.	.	.
1	-ALPHAyz	ALPHAzy
0	1	-ALPHAzx
0	0	1

Public Members

float data[3 * 3]

struct TY_GYRO_SCALE

#include <TYApi.h>

a 3x3 matrix

.	.	.
SCALEx	0	0
0	SCALEy	0
0	0	SCALEz

Public Members

float data[3 * 3]

struct TY_CAMERA_TO_IMU

#include <TYApi.h>

a 4x4 matrix

.	.	.	.
r11	r12	r13	t1
r21	r22	r23	t2
r31	r32	r33	t3
0	0	0	1

Public Members

float data[4 * 4]

struct TY_TOF_FREQ

#include <TYApi.h>

Public Members

uint32_t freq1

uint32_t freq2

struct TY_IMAGE_DATA

#include <TYApi.h>

Public Members

uint64_t timestamp: Timestamp in microseconds.

int32_t imageIndex: image index used in trigger mode

int32_t status: Status of this buffer.

int32_t componentID: Where current data come from.

int32_t size: Buffer size.

void *buffer: Pointer to data buffer.

int32_t width: Image width in pixels.

int32_t height: Image height in pixels.

int32_t pixelFormat: Pixel format, see TY_PIXEL_FORMAT_LIST.

int32_t reserved[9]: Reserved.

struct TY_FRAME_DATA

#include <TYApi.h>

Public Members

void *userBuffer: Pointer to user enqueued buffer, user should enqueue this buffer in the end of callback.

int32_t bufferSize: Size of userBuffer.

int32_t validCount: Number of valid data.

int32_t reserved[6]: Reserved: reserved[0],laser_val;.

TY_IMAGE_DATA image[10]: Buffer data, max to 10 images per frame, each buffer data could be an image or something else.

struct TY_EVENT_INFO

#include <TYApi.h>

Public Members

TY_EVENT eventId

char message[124]

struct TY_DO_WORKMODE

#include <TYApi.h>

Public Members

TY_E_DO_MODE mode

TY_E_VOLT_T volt

uint32_t freq

uint32_t duty

uint32_t mode_supported

uint32_t volt_supported

uint32_t reserved[3]

struct TY_DI_WORKMODE

#include <TYApi.h>

Public Members

TY_E_DI_MODE mode

TY_E_DI_INT_ACTION int_act

uint32_t mode_supported

uint32_t int_act_supported

uint32_t status

uint32_t reserved[3]

API for coodinate mapping functions

Coordinate Conversion API.

Note

Considering performance, we leave the responsibility of parameters check to users.

Defines

TYMAP_CHECKRET(f, bufToFree)

Typedefs

typedef struct TY_PIXEL_DESC TY_PIXEL_DESC

typedef struct TY_PIXEL_COLOR_DESC TY_PIXEL_COLOR_DESC

Functions

TY_CAPI TYInvertExtrinsic(const TY_CAMERA_EXTRINSIC *orgExtrinsic, TY_CAMERA_EXTRINSIC *invExtrinsic)

Calculate 4x4 extrinsic matrix’s inverse matrix.

Parameters:

orgExtrinsic – [in] Input extrinsic matrix.
invExtrinsic – [out] Inverse matrix.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_ERROR – Calculation failed.

TY_CAPI TYMapDepthToPoint3d(const TY_CAMERA_CALIB_INFO *src_calib, uint32_t depthW, uint32_t depthH, const TY_PIXEL_DESC *depthPixels, uint32_t count, TY_VECT_3F *point3d, float f_scale_unit = 1.0f)

Map pixels on depth image to 3D points.

Parameters:

src_calib – [in] Depth image’s calibration data.
depthW – [in] Width of depth image.
depthH – [in] Height of depth image.
depthPixels – [in] Pixels on depth image.
count – [in] Number of depth pixels.
point3d – [out] Output point3D.

Return values:

TY_STATUS_OK – Succeed.

TY_CAPI TYMapPoint3dToDepth(const TY_CAMERA_CALIB_INFO *dst_calib, const TY_VECT_3F *point3d, uint32_t count, uint32_t depthW, uint32_t depthH, TY_PIXEL_DESC *depth, float f_scale_unit = 1.0f)

Map 3D points to pixels on depth image.

Reverse operation of TYMapDepthToPoint3d.

Parameters:

dst_calib – [in] Target depth image’s calibration data.
point3d – [in] Input 3D points.
count – [in] Number of points.
depthW – [in] Width of target depth image.
depthH – [in] Height of target depth image.
depth – [out] Output depth pixels.

Return values:

TY_STATUS_OK – Succeed.

TY_CAPI TYMapDepthImageToPoint3d(const TY_CAMERA_CALIB_INFO *src_calib, int32_t imageW, int32_t imageH, const uint16_t *depth, TY_VECT_3F *point3d, float f_scale_unit = 1.0f)

Map depth image to 3D points.

0 depth pixels maps to (NAN, NAN, NAN).

Parameters:

src_calib – [in] Depth image’s calibration data.
depthW – [in] Width of depth image.
depthH – [in] Height of depth image.
depth – [in] Depth image.
point3d – [out] Output point3D image.

Return values:

TY_STATUS_OK – Succeed.

TY_CAPI TYMapPoint3dToDepthImage(const TY_CAMERA_CALIB_INFO *dst_calib, const TY_VECT_3F *point3d, uint32_t count, uint32_t depthW, uint32_t depthH, uint16_t *depth, float f_target_scale = 1.0f)

Map 3D points to depth image.

(NAN, NAN, NAN) will be skipped.

Parameters:

dst_calib – [in] Target depth image’s calibration data.
point3d – [in] Input 3D points.
count – [in] Number of points.
depthW – [in] Width of target depth image.
depthH – [in] Height of target depth image.
depth – [inout] Depth image buffer.

Return values:

TY_STATUS_OK – Succeed.

TY_CAPI TYMapPoint3dToPoint3d(const TY_CAMERA_EXTRINSIC *extrinsic, const TY_VECT_3F *point3dFrom, int32_t count, TY_VECT_3F *point3dTo)

Map 3D points to another coordinate.

Parameters:

extrinsic – [in] Extrinsic matrix.
point3dFrom – [in] Source 3D points.
count – [in] Number of source 3D points.
point3dTo – [out] Target 3D points.

Return values:

TY_STATUS_OK – Succeed.

static inline TY_STATUS TYMapDepthToColorCoordinate(const TY_CAMERA_CALIB_INFO *depth_calib, uint32_t depthW, uint32_t depthH, const TY_PIXEL_DESC *depth, uint32_t count, const TY_CAMERA_CALIB_INFO *color_calib, uint32_t mappedW, uint32_t mappedH, TY_PIXEL_DESC *mappedDepth, float f_scale_unit = 1.0f)

Map depth pixels to color coordinate pixels.

Parameters:

depth_calib – [in] Depth image’s calibration data.
depthW – [in] Width of current depth image.
depthH – [in] Height of current depth image.
depth – [in] Depth image pixels.
count – [in] Number of depth image pixels.
color_calib – [in] Color image’s calibration data.
mappedW – [in] Width of target depth image.
mappedH – [in] Height of target depth image.
mappedDepth – [out] Output pixels.

Return values:

TY_STATUS_OK – Succeed.

static inline TY_STATUS TYMapDepthImageToColorCoordinate(const TY_CAMERA_CALIB_INFO *depth_calib, uint32_t depthW, uint32_t depthH, const uint16_t *depth, const TY_CAMERA_CALIB_INFO *color_calib, uint32_t mappedW, uint32_t mappedH, uint16_t *mappedDepth, float f_scale_unit = 1.0f)

Map original depth image to color coordinate depth image.

Parameters:

depth_calib – [in] Depth image’s calibration data.
depthW – [in] Width of current depth image.
depthH – [in] Height of current depth image.
depth – [in] Depth image.
color_calib – [in] Color image’s calibration data.
mappedW – [in] Width of target depth image.
mappedH – [in] Height of target depth image.
mappedDepth – [out] Output pixels.

Return values:

TY_STATUS_OK – Succeed.

static inline TY_STATUS TYCreateDepthToColorCoordinateLookupTable(const TY_CAMERA_CALIB_INFO *depth_calib, uint32_t depthW, uint32_t depthH, const uint16_t *depth, const TY_CAMERA_CALIB_INFO *color_calib, uint32_t mappedW, uint32_t mappedH, TY_PIXEL_DESC *lut, float f_scale_unit = 1.0f)

Create depth image to color coordinate lookup table.

Parameters:

depth_calib – [in] Depth image’s calibration data.
depthW – [in] Width of current depth image.
depthH – [in] Height of current depth image.
depth – [in] Depth image.
color_calib – [in] Color image’s calibration data.
mappedW – [in] Width of target depth image.
mappedH – [in] Height of target depth image.
lut – [out] Output lookup table.

Return values:

TY_STATUS_OK – Succeed.

static inline TY_STATUS TYMapRGBPixelsToDepthCoordinate(const TY_CAMERA_CALIB_INFO *depth_calib, uint32_t depthW, uint32_t depthH, const uint16_t *depth, const TY_CAMERA_CALIB_INFO *color_calib, uint32_t rgbW, uint32_t rgbH, TY_PIXEL_COLOR_DESC *src, uint32_t cnt, uint32_t min_distance, uint32_t max_distance, TY_PIXEL_COLOR_DESC *dst, float f_scale_unit = 1.0f)

Map original RGB pixels to depth coordinate.

Parameters:

depth_calib – [in] Depth image’s calibration data.
depthW – [in] Width of current depth image.
depthH – [in] Height of current depth image.
depth – [in] Current depth image.
color_calib – [in] Color image’s calibration data.
rgbW – [in] Width of RGB image.
rgbH – [in] Height of RGB image.
src – [in] Input RGB pixels info.
cnt – [in] Input src RGB pixels cnt
min_distance – [in] The min distance(mm), which is generally set to the minimum measured distance of the current camera
max_distance – [in] The longest distance(mm), which is generally set to the longest measuring distance of the current camera
dst – [out] Output RGB pixels info.

Return values:

TY_STATUS_OK – Succeed.

static inline TY_STATUS TYMapRGBImageToDepthCoordinate(const TY_CAMERA_CALIB_INFO *depth_calib, uint32_t depthW, uint32_t depthH, const uint16_t *depth, const TY_CAMERA_CALIB_INFO *color_calib, uint32_t rgbW, uint32_t rgbH, const uint8_t *inRgb, uint8_t *mappedRgb, float f_scale_unit = 1.0f)

Map original RGB image to depth coordinate RGB image.

Parameters:

depth_calib – [in] Depth image’s calibration data.
depthW – [in] Width of current depth image.
depthH – [in] Height of current depth image.
depth – [in] Current depth image.
color_calib – [in] Color image’s calibration data.
rgbW – [in] Width of RGB image.
rgbH – [in] Height of RGB image.
inRgb – [in] Current RGB image.
mappedRgb – [out] Output RGB image.

Return values:

TY_STATUS_OK – Succeed.

static inline TY_STATUS TYMapRGB48ImageToDepthCoordinate(const TY_CAMERA_CALIB_INFO *depth_calib, uint32_t depthW, uint32_t depthH, const uint16_t *depth, const TY_CAMERA_CALIB_INFO *color_calib, uint32_t rgbW, uint32_t rgbH, const uint16_t *inRgb, uint16_t *mappedRgb, float f_scale_unit = 1.0f)

Map original RGB48 image to depth coordinate RGB image.

Parameters:

depth_calib – [in] Depth image’s calibration data.
depthW – [in] Width of current depth image.
depthH – [in] Height of current depth image.
depth – [in] Current depth image.
color_calib – [in] Color image’s calibration data.
rgbW – [in] Width of RGB48 image.
rgbH – [in] Height of RGB48 image.
inRgb – [in] Current RGB48 image.
mappedRgb – [out] Output RGB48 image.

Return values:

TY_STATUS_OK – Succeed.

static inline TY_STATUS TYMapMono16ImageToDepthCoordinate(const TY_CAMERA_CALIB_INFO *depth_calib, uint32_t depthW, uint32_t depthH, const uint16_t *depth, const TY_CAMERA_CALIB_INFO *color_calib, uint32_t rgbW, uint32_t rgbH, const uint16_t *gray, uint16_t *mappedGray, float f_scale_unit = 1.0f)

Map original MONO16 image to depth coordinate MONO16 image.

Parameters:

depth_calib – [in] Depth image’s calibration data.
depthW – [in] Width of current depth image.
depthH – [in] Height of current depth image.
depth – [in] Current depth image.
color_calib – [in] Color image’s calibration data.
rgbW – [in] Width of MONO16 image.
rgbH – [in] Height of MONO16 image.
gray – [in] Current MONO16 image.
mappedGray – [out] Output MONO16 image.

Return values:

TY_STATUS_OK – Succeed.

static inline TY_STATUS TYMapMono8ImageToDepthCoordinate(const TY_CAMERA_CALIB_INFO *depth_calib, uint32_t depthW, uint32_t depthH, const uint16_t *depth, const TY_CAMERA_CALIB_INFO *color_calib, uint32_t monoW, uint32_t monoH, const uint8_t *inMono, uint8_t *mappedMono, float f_scale_unit = 1.0f)

Map original MONO8 image to depth coordinate MONO8 image.

Parameters:

depth_calib – [in] Depth image’s calibration data.
depthW – [in] Width of current depth image.
depthH – [in] Height of current depth image.
depth – [in] Current depth image.
color_calib – [in] Color image’s calibration data.
monoW – [in] Width of MONO8 image.
monoH – [in] Height of MONO8 image.
inMono – [in] Current MONO8 image.
mappedMono – [out] Output MONO8 image.

Return values:

TY_STATUS_OK – Succeed.

struct TY_PIXEL_DESC

#include <TYCoordinateMapper.h>

Public Members

int16_t x

int16_t y

uint16_t depth

uint16_t rsvd

struct TY_PIXEL_COLOR_DESC

#include <TYCoordinateMapper.h>

Public Members

int16_t x

int16_t y

uint8_t bgr_ch1

uint8_t bgr_ch2

uint8_t bgr_ch3

uint8_t rsvd

API for Depth and IR image post processing

@breif Image post-process API

Defines

DepthSpeckleFilterParameters_Initializer

DepthEnhenceParameters_Initializer

Functions

TY_CAPI TYImageProcesAcceEnable(bool en)

Image processing acceleration switch.

Parameters:: en – [in] Enable image process acceleration switch

TY_CAPI TYUndistortImage(const TY_CAMERA_CALIB_INFO *srcCalibInfo, const TY_IMAGE_DATA *srcImage, const TY_CAMERA_INTRINSIC *cameraNewIntrinsic, TY_IMAGE_DATA *dstImage)

Do image undistortion, only support TY_PIXEL_FORMAT_MONO ,TY_PIXEL_FORMAT_RGB,TY_PIXEL_FORMAT_BGR.

Parameters:

srcCalibInfo – [in] Image calibration data.
srcImage – [in] Source image.
cameraNewIntrinsic – [in] Expected new image intrinsic, will use srcCalibInfo for new image intrinsic if set to NULL.
dstImage – [out] Output image.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NULL_POINTER – Any srcCalibInfo, srcImage, dstImage, srcImage->buffer, dstImage->buffer is NULL.
TY_STATUS_INVALID_PARAMETER – Invalid srcImage->width, srcImage->height, dstImage->width, dstImage->height or unsupported pixel format.

TY_CAPI TYDepthSpeckleFilter(TY_IMAGE_DATA *depthImage, const DepthSpeckleFilterParameters *param)

Remove speckles on depth image.

Parameters:

depthImage – [inout] Depth image to be processed.
param – [in] Algorithm parameters.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NULL_POINTER – Any depth, param or depth->buffer is NULL.
TY_STATUS_INVALID_PARAMETER – param->max_speckle_size <= 0 or param->max_speckle_diff <= 0

TY_CAPI TYDepthEnhenceFilter(const TY_IMAGE_DATA *depthImages, int imageNum, TY_IMAGE_DATA *guide, TY_IMAGE_DATA *output, const DepthEnhenceParameters *param)

Remove speckles on depth image.

Parameters:

depthImage – [in] Pointer to depth image array.
imageNum – [in] Depth image array size.
guide – [inout] Guide image.
output – [out] Output depth image.
param – [in] Algorithm parameters.

Return values:

TY_STATUS_OK – Succeed.
TY_STATUS_NULL_POINTER – Any depthImage, param, output or output->buffer is NULL.
TY_STATUS_INVALID_PARAMETER – imageNum >= 11 or imageNum <= 0, or any image invalid
TY_STATUS_OUT_OF_MEMORY – Output image not suitable.

struct DepthSpeckleFilterParameters

#include <TYImageProc.h>

default parameter value definition

Public Members

int max_speckle_size

int max_speckle_diff

struct DepthEnhenceParameters

#include <TYImageProc.h>

default parameter value definition

Public Members

float sigma_s: filter param on space

float sigma_r: filter param on range

int outlier_win_sz: outlier filter windows ize

float outlier_rate

API for Color image post processing

@breif this file Include interface declare for raw color image (bayer format) process functions

Defines

TYISP_CAPI

Typedefs

typedef void *TY_ISP_HANDLE

Enums

enum TY_ISP_FEATURE_ID

Values:

enumerator TY_ISP_FEATURE_CAM_MODEL

enumerator TY_ISP_FEATURE_CAM_DEV_HANDLE: device handle for device control

enumerator TY_ISP_FEATURE_CAM_DEV_COMPONENT: the component to control

enumerator TY_ISP_FEATURE_IMAGE_SIZE: image size width&height

enumerator TY_ISP_FEATURE_WHITEBALANCE_GAIN

enumerator TY_ISP_FEATURE_ENABLE_AUTO_WHITEBALANCE

enumerator TY_ISP_FEATURE_SHADING

enumerator TY_ISP_FEATURE_SHADING_CENTER

enumerator TY_ISP_FEATURE_BLACK_LEVEL: global black level

enumerator TY_ISP_FEATURE_BLACK_LEVEL_COLUMN: to set different black level for each image column

enumerator TY_ISP_FEATURE_BLACK_LEVEL_GAIN: global pixel gain

enumerator TY_ISP_FEATURE_BLACK_LEVEL_GAIN_COLUMN: to set different gain for each image column

enumerator TY_ISP_FEATURE_BAYER_PATTERN

enumerator TY_ISP_FEATURE_DEMOSAIC_METHOD

enumerator TY_ISP_FEATURE_GAMMA

enumerator TY_ISP_FEATURE_DEFECT_PIXEL_LIST

enumerator TY_ISP_FEATURE_CCM

enumerator TY_ISP_FEATURE_CCM_ENABLE: ENABLE CCM.

enumerator TY_ISP_FEATURE_BRIGHT

enumerator TY_ISP_FEATURE_CONTRAST

enumerator TY_ISP_FEATURE_AUTOBRIGHT

enumerator TY_ISP_FEATURE_INPUT_RESAMPLE_SCALE

enumerator TY_ISP_FEATURE_ENABLE_AUTO_EXPOSURE_GAIN

enumerator TY_ISP_FEATURE_AUTO_EXPOSURE_RANGE: exposure range ,default no limit

enumerator TY_ISP_FEATURE_AUTO_GAIN_RANGE: gain range ,default no limit

enumerator TY_ISP_FEATURE_AUTO_EXPOSURE_UPDATE_INTERVAL: update device exposure interval , default 5 frame

enumerator TY_ISP_FEATURE_DEBUG_LOG: display detail log information

enum TY_ISP_BAYER_PATTERN

Values:

enumerator TY_ISP_BAYER_GB

enumerator TY_ISP_BAYER_BG

enumerator TY_ISP_BAYER_RG

enumerator TY_ISP_BAYER_GR

enumerator TY_ISP_BAYER_AUTO

enum TY_DEMOSAIC_METHOD

Values:

enumerator TY_DEMOSAIC_METHOD_SIMPLE

enumerator TY_DEMOSAIC_METHOD_BILINEAR

enumerator TY_DEMOSAIC_METHOD_HQLINEAR

enumerator TY_DEMOSAIC_METHOD_EDGESENSE

Functions

TYISP_CAPI TYISPCreate(TY_ISP_HANDLE *handle)

TYISP_CAPI TYISPRelease(TY_ISP_HANDLE *handle)

TYISP_CAPI TYISPLoadConfig(TY_ISP_HANDLE handle, const uint8_t *config, uint32_t config_size)

TYISP_CAPI TYISPUpdateDevice(TY_ISP_HANDLE handle): @breif called by main thread to update & control device status for ISP

TYISP_CAPI TYISPSetFeature(TY_ISP_HANDLE handle, TY_ISP_FEATURE_ID feature_id, const uint8_t *data, int32_t size)

TYISP_CAPI TYISPGetFeature(TY_ISP_HANDLE handle, TY_ISP_FEATURE_ID feature_id, uint8_t *data_buff, int32_t buff_size)

TYISP_CAPI TYISPGetFeatureSize(TY_ISP_HANDLE handle, TY_ISP_FEATURE_ID feature_id, int32_t *size)

TYISP_CAPI TYISPHasFeature(TY_ISP_HANDLE handle, TY_ISP_FEATURE_ID feature_id)

TYISP_CAPI TYISPGetFeatureInfoList(TY_ISP_HANDLE handle, TY_ISP_FEATURE_INFO *info_buffer, int buffer_size)

TYISP_CAPI TYISPGetFeatureInfoListSize(TY_ISP_HANDLE handle, int32_t *buffer_size)

TYISP_CAPI TYISPProcessImage(TY_ISP_HANDLE handle, const TY_IMAGE_DATA *image_bayer, TY_IMAGE_DATA *image_out): @breif convert bayer raw image to rgb image,output buffer is allocated by invoker

struct TY_ISP_FEATURE_INFO

#include <TyIsp.h>

Public Members

TY_ISP_FEATURE_ID id

int32_t size

const char *name

const char *value_type

TY_ACCESS_MODE mode