Product Specifications
Percipio depth camera offers various housing structures, hardware interfaces, and measurement accuracy configurations to fulfill the requirements of different scenarios.
Pre-Release Products
The products listed in the table below are camera models currently in the Engineering Validation Test (EVT) phase. They have passed basic verification tests and are available for limited supply. The product specifications and parameters may be adjusted during iterations. Click the download icon to retrieve the full specifications.
Camera Type |
Model |
Specifications |
|---|---|---|
Active Stereo Network Depth Camera: Structured Light with Fringe Pattern |
VMD02-4070 |
|
Active Stereo Network Depth Camera: Structured Light with Fringe Pattern |
VMD02-5011 |
|
Active Stereo Network Depth Camera: Structured Light with Fringe Pattern |
VMD03-8521C VMD03-8521 |
|
Active Stereo Network Depth Camera |
FM855-E1-G |
|
Active Stereo Network Depth Cameras
The models listed in the table below are all formally mass-produced models, and all products have passed comprehensive performance verification tests. The specification parameters of each model are standard factory values. Please refer to the environmental requirements in the user manual for actual deployment. Click the model link to retrieve the full specifications or click the download icon to obtain the user manual.
Model |
Z Accuracy(mm) |
XY Accuracy(mm) |
Working Distance(mm) |
User Manual |
|---|---|---|---|---|
FM854-E1 New |
0.40 @ 800 3.63 @ 1500 |
5.44 @ 800 11.66 @ 1500 |
700 ~ 3000 |
– |
0.59 @ 500 2.13 @ 1000 |
3.48 @ 500 6.96 @ 1000 |
300 ~ 1300 |
– |
|
1.78 @ 1000 4.27 @ 1500 8.19 @ 2500 |
9.60 @ 100 14.41 @ 1500 24.01 @ 2500 |
700 ~ 6000 |
– |
|
1.33 @ 1000 2.30 @ 1500 |
6.86 @ 1000 10.29 @ 1500 |
800 ~ 3000 |
|
|
1.56 @ 1000 1.80 @ 1500 |
3.20 @ 1000 4.80 @ 1500 |
800 ~ 3000 |
|
|
0.51 @ 500 2.01 @ 1000 |
1.14 @ 500 2.29 @ 1000 |
300 ~ 1000 |
|
|
2.52 @ 1500 4.33 @ 2500 |
3.43 @ 1500 5.72 @ 2500 |
700 ~ 2500 |
|
|
1.88 @ 1500 2.94 @ 2000 |
3.5 @ 1500 5.0 @ 2000 |
900 ~ 3500 |
|
|
2.48 @ 2000 4.25 @ 3000 |
4.57 @ 2000 6.86 @ 3000 |
1300 ~ 4200 |
|
ToF Network Depth Cameras
The models listed in the table below are all formally mass-produced models, and all products have passed comprehensive performance verification tests. The specification parameters of each model are standard factory values. Please refer to the environmental requirements in the user manual for actual deployment. Click the model link to retrieve the full specifications or click the download icon to obtain the user manual.
Model |
Z Accuracy(mm) |
Working Distance(mm) |
User Manual |
|---|---|---|---|
± 10 + 0.5 % of depth |
50 ~ 8000 |
|
|
± 10 + 0.5 % of depth |
50 ~ 5000 |
|
|
± 5 + 1% of depth [400, 2200] ± 15 + 1 % of depth (2200, 4300] |
100 ~ 10000 |
– |
|
± 4 + 0.25 % of depth |
300 ~ 9500 |
– |
|
±5 + 0.5% of depth |
150 ~ 6000 |
– |
Discontinued Products
The products listed in the table below are old camera models that have been discontinued. Some functions or performance features may have been replaced by more recent models. The specification sheets are still available for reference, but some accessories or firmware updates may no longer be provided.
Type |
Model |
Specifications |
|---|---|---|
USB - Active Stereo |
FM811-TIX |
|
Network - Active Stereo |
PS801-E1 |
|
Network - ToF |
TM260-E2 |
|
Network - ToF |
TM260-E1 |
|
Tip
When the camera is being initialized, the PWR indicator light stays on constantly. After the initialization is completed, the status of the indicator light is shown in the following table.
Name
Color
Descriptions
PWR
Red
Flashing at 1Hz: The camera is working normally.
Flashing at > 1Hz: The camera firmware has encountered an initialization error. Please refer to -1024 Error Code.
Constantly on: The camera is currently in a system freeze state.
Constantly off: The camera is either not powered on or in a system freeze state.
ETH
Red
Constantly on: The camera is working in Gigabit Ethernet mode.
Constantly off: The camera is not working in Gigabit Ethernet mode.
ACT
Yellow
Flashing: Data is being transmitted.
Constantly on: No data is being transmitted.
BSY
White
Flashing: Data is being transmitted.
Constantly on: No data is being transmitted.
For product trials, technical consultations, bulk purchases, or customized solutions, please feel free to contact support@pcp3d.com.