Camera Indicator Light Descriptions
Percipio cameras employ diverse indicator light configurations, including combinations such as PWR/ETH/ACT/BSY, PWR/ETH/ACT, STAT/ETH/ACT/BSY, STAT/ETH/ACT, and single indicator light. The indicator lights visually indicate different camera operating states through various colors and blinking patterns.
Camera initialization Process
Upon power-up, the camera requires time to initialize. During this process, the PWR light, STAT light, or single indicator light remains constantly on.
Once initialization completes, please refer to the appropriate status descriptions based on your camera’s specific indicator light configuration.
Indicator Light Status After Initialization
For cameras with PWR/ETH/ACT/BSY or PWR/ETH/ACT configuration:
Name |
Color |
Descriptions |
---|---|---|
PWR |
Red |
Flashing at 1Hz (slow flashing): The camera is working normally. Flashing at > 1Hz (fast flashing): The camera firmware has encountered an initialization error. Please refer to -1024 Error Code. Constantly on: The camera is currently in a system freeze state. Constantly off: The camera is either not powered on or in a system freeze state. |
ETH |
Green |
Constantly on: The camera is working in Gigabit Ethernet mode. Constantly off: The camera is not working in Gigabit Ethernet mode. |
ACT |
Yellow |
Flashing: Data is being transmitted. Constantly on: No data is being transmitted. |
BSY |
White |
Flashing: The camera is acquiring images. Constantly on: The camera is not acquiring images. |
For cameras with STAT/ETH/ACT/BSY or STAT/ETH/ACT configuration:
Name |
Color |
Descriptions |
---|---|---|
STAT |
Blue / Red |
Blue flashing at 1Hz (slow flashing): The camera is working normally. Red flashing at >1Hz (fast flashing): The camera is not working normally. Red constantly on: The camera is currently in a system freeze state. |
ETH |
Green |
Constantly on: The camera is working in Gigabit Ethernet mode. Constantly off: The camera is not working in Gigabit Ethernet mode. |
ACT |
Yellow |
Flashing: Data is being transmitted. Constantly on: No data is being transmitted. |
BSY |
White |
Flashing: The camera is acquiring images. Constantly on: The camera is not acquiring images. |
For cameras with single indicator light:
Color |
descriptions |
---|---|
Blue/red |
Blue flashing at 1Hz (slow flashing): The camera is in standby state. Blue flashing at >1Hz (fast flashing): Data is being transmitted. Red constantly on: The camera is currently in a system freeze state. Red flashing at >1Hz (fast flashing): The camera is not working normally. |